26th DAAAM International Symposium

 

DOI:10.2507/26th.daaam.proceedings.000 Katalinic, B.: Preface
DOI:10.2507/26th.daaam.proceedings.001 Andreev, V.; Kirsanov, K. & Pryanichnikov, V.: Geographically Distributed “Multi-Operator” Control for Mechatronic Devices via the Internet
DOI:10.2507/26th.daaam.proceedings.002 Buchmeister, B. & Palcic, I.: Indicator for Project Optimization with the Cost-Time Investment Criterion
DOI:10.2507/26th.daaam.proceedings.003 Neumann, P.; Houser, J.; Pospisilik, M.; Skocik, P. & Adamek, M.: Some Methods for Electronic Component Authenticity Assessment
DOI:10.2507/26th.daaam.proceedings.004 Skocik, P.; Korbel, J. & Neumann, P.: Design and Implementation of Lenses for Shaping the Beam of Millimeter Waves in Free Space
DOI:10.2507/26th.daaam.proceedings.005 Janacova, D.; Mokrejs, P.; Vasek, V.; Drga, R.; Liska, O. & Krenek, J.: Mathematic Model of Heat Transport in Materials During Cutting Process
DOI:10.2507/26th.daaam.proceedings.006 Perutka, K.: Electronic Didactic Tool for Primary Schools in Czech Republic
DOI:10.2507/26th.daaam.proceedings.007 Kramar, V.: Investigation of Changes and Development of Mathematical Model for a Drilling Vessel
DOI:10.2507/26th.daaam.proceedings.008 Sysel, M.: Tilt Compensated eComp
DOI:10.2507/26th.daaam.proceedings.009 Bajric, H.; Kadric, E. & Pasic, M.: A Comparison of Same Slope Seasonality and Holt-Winters Smoothing Forecasting Models
DOI:10.2507/26th.daaam.proceedings.010 Rados, B. & Rados, A.: Implementation of multi-criteria decision making in planning traffic systems
DOI:10.2507/26th.daaam.proceedings.011 Adamek, M.; Neumann, P.; Pospisilik, M. & Matysek, M.: Using of GSM Locator in Security Applications
DOI:10.2507/26th.daaam.proceedings.012 Andrejiova, M.; Kralikova, R. & Wessely, E.: The Air Quality Assessment from the Stationary Source Air Pollution
DOI:10.2507/26th.daaam.proceedings.013 Kremljak, Z.: Study of E-Commerce Advantages for E-Supply Chains
DOI:10.2507/26th.daaam.proceedings.014 Fedorov, A.; Zobnin, S.; Shkodyrev, V.; Goloschchapov, E. & Potekhin, V.: Fuzzy Decision Support in Distributed V2V Systems
DOI:10.2507/26th.daaam.proceedings.015 Matysek, M.; Adamek, M. & Karafiat, T.: The Mobile Monitoring and Control of Real Systems
DOI:10.2507/26th.daaam.proceedings.016 Damic, V. & Cohodar, M.: Dynamic Analysis and Visualization of Spatial Manipulators with Closed Structure
DOI:10.2507/26th.daaam.proceedings.017 Zhirabok, A.; Filaretov, V. & Pavlov, S.: Fault Isolation in Technical Systems by Data-Driven Method
DOI:10.2507/26th.daaam.proceedings.018 Sysala, T.; Neumann, P. & Mikus, K.: The Microcomputer Application in Physical Principles Demonstration Model Design
DOI:10.2507/26th.daaam.proceedings.019 Chalupa, P. & Novak, J.: Robust and adaptive control of twin rotor MIMO system
DOI:10.2507/26th.daaam.proceedings.020 Stuja, K.; Poszvek, G.; Markl, E. & Aburaia, M.: Design and Optimization of Pumping Aggregate for Hydraulic Active Car Suspension using Software SolidWorks
DOI:10.2507/26th.daaam.proceedings.021 Kolosowski, M.; Duda, J. & Tomasiak, J.: Statistical process control in conditions of piece and small lot production
DOI:10.2507/26th.daaam.proceedings.022 Livinti, P.: Speed Control of a Permanent Magnet D.C. Servomotor through CompactRIO 9074
DOI:10.2507/26th.daaam.proceedings.023 Catana, R. & Cican, G.: Detailed Gas Dynamic Study of Performances for Two Types Turbofan Configurations
DOI:10.2507/26th.daaam.proceedings.024 Comanescu, A.; Comanescu, D. & Dugaesescu, I.: Leg Mechanism Motion and Structural Characteristics
DOI:10.2507/26th.daaam.proceedings.025 Obucina, M.; Dzaferovic, E. & Gondzic, E.: Numerical Analysis Viscoelasticity Properties Composite of Wood
DOI:10.2507/26th.daaam.proceedings.026 Obucina, M. & Akvic, A.: Influence of Gluing Technology on the Shear Strength in the Gluing of Solid Wood
DOI:10.2507/26th.daaam.proceedings.027 Beles, H.; Rus, A.; Dragomir, G.; Mitran, T.; Trusca, D. & Tolea, B.: Researches Regarding the Continuous Improvement of the ABS (Anti-Lock Braking System) Operation for the Passenger Cars
DOI:10.2507/26th.daaam.proceedings.028 Popa, C. L.; Cotet, C. E.; Constantin, F. & Zaleschi Negrea, V. -.: Optimizing a Beverage Can Production Line by Material Flow Simulation
DOI:10.2507/26th.daaam.proceedings.029 Matusu, R.: Robust Stabilization of a Main Irrigation Canal Pool via Fractional Order PI Controller: A Graphical Investigation
DOI:10.2507/26th.daaam.proceedings.030 Matusu, R.: Control of Interval Systems by Using Two Feedback Controllers
DOI:10.2507/26th.daaam.proceedings.031 Olt, J. & Maksarov, V.: Development of Chatter-Resistant System of Cutting Tool
DOI:10.2507/26th.daaam.proceedings.032 Olt, J. & Maksarov, V.: Cutting Process Simulation on the Basis of Rheological Properties of Metals
DOI:10.2507/26th.daaam.proceedings.033 Macku, L. & Samek, D.: Self – Organizing Migrating Algorithm in Model Predictive Control: Case study on Semi-Batch Chemical Reactor
DOI:10.2507/26th.daaam.proceedings.034 Begic-Hajdarevic, D.; Pasic, M.; Vucijak, B. & Cekic, A.: Statistical Process Control of Surface Roughness during CO2 Laser Cutting using Oxygen as Assist Gas
DOI:10.2507/26th.daaam.proceedings.035 Navratil, M.; Kresalek, V.; Kudelka, J. & Martinek, T.: Design of Scanning System for Mechanoscopic Analysis
DOI:10.2507/26th.daaam.proceedings.036 Pascu, N.; Dobrescu, T.; Enciu, G. & Jiga, G.: Graphic Modeling and Visual Impact on the Structural Design of Packaging in CAD Applications
DOI:10.2507/26th.daaam.proceedings.037 Cekic, A.; Rasovic, N.; Obad, M.; Kaljun, J.; Dolsek, B. & Begic-Hajdarevic, D.: Production of Optimized Layered Products using Intelligent Support
DOI:10.2507/26th.daaam.proceedings.038 Pokorny, P.: Altitude Measurement and Processing of their Values
DOI:10.2507/26th.daaam.proceedings.039 Bures, M.: Time Demands of Virtual Ergonomic Modelling – Experimental Study
DOI:10.2507/26th.daaam.proceedings.040 Filaretov, V.; Yukhimets, D.; Zuev, A.; Gubankov, A.; Mursalimov, E. & Gornostaev, I.: Features of Creating of Workpieces Models by Means of Vision Systems
DOI:10.2507/26th.daaam.proceedings.041 Opran, C.; Balota, D. A.; Teodorescu, D. F. & Dobrescu, T. G.: Modelling Assisted Injection Molding with Magnetic Field for Complex Polymeric Products
DOI:10.2507/26th.daaam.proceedings.042 Opran, C.; Ghionea, I. G. & Pricop, M.: Embedded Modelling and Simulation Software System for Adaptive Engineering of Hydraulic Gear Pumps
DOI:10.2507/26th.daaam.proceedings.043 Rusu-Casandra, A. L.; Baciu, F. & Iliescu, N.: Reflection Photoelastic and Finite Element Residual Stress Analysis of a Torpedo Pot for Cast Iron
DOI:10.2507/26th.daaam.proceedings.044 Subramanian, A. & Sun, H.: A Model for Value Chain Integration in a Vertically Integrated Design and Manufacturing Firm
DOI:10.2507/26th.daaam.proceedings.045 Pospisilik, M.; Silva, R. M. & Adamek, M.: Voltage Controlled Amplifier with Linearized Response to the Controlling Voltage
DOI:10.2507/26th.daaam.proceedings.046 Januska, M. & Faifr, A.: Project Quality Management Lifecycle: A Case Study of the Commencement of Insulin Pen Mass Production
DOI:10.2507/26th.daaam.proceedings.047 Poliakov, A.; Pashkov, Y.; Katalinic, B.; Kalinin, M. & Pakhaliuk, V.: Engineering Biomechanics – A Component of International Educational Project "FESTO-SYNERGY"
DOI:10.2507/26th.daaam.proceedings.048 Varacha, P.: Adaptive Strategy for Neural Network Synthesis Constant Estimation
DOI:10.2507/26th.daaam.proceedings.049 Vaskova, H. & Buckova, M.: Spectroscopic Measurement and Analysis of Fat in Mi
DOI:10.2507/26th.daaam.proceedings.050 Iskakov, U. & Breido, J.: Settings Adaptation System for Current Protection Relay
DOI:10.2507/26th.daaam.proceedings.051 Ionkin, I.; Ragutkin, A.; Roslyakov, P.; Morozov, I. & Zaichenko, M.: Research of the Influence of Flue Gas Parameter Changes on Air Dispersion Processes of Hazardous Substances
DOI:10.2507/26th.daaam.proceedings.052 Tikal, F.: Evolution of Indoor Bullet Trap Design
DOI:10.2507/26th.daaam.proceedings.053 Hajdarevic, S. & Martinovic, S.: The Effect of Dowel Spacing on the Stress and Strain of Case-Type Furniture Corner Joint
DOI:10.2507/26th.daaam.proceedings.054 Plsek, S. & Vasek, V.: Takahashi Controller with Continuous Identification in Fast Response Application
DOI:10.2507/26th.daaam.proceedings.055 Katsurin, A.: Planning Trajectory of the Mobile Robot with a Camera
DOI:10.2507/26th.daaam.proceedings.056 Pryanichnikov, V. & Shipovalov, E.: Terrain modeling for mobile robot control using cross-section curves in nested multi-resolution grids
DOI:10.2507/26th.daaam.proceedings.057 Amol, A. S.: Multicriteria Dynamic Scheduling by Topsis and Goal Programming
DOI:10.2507/26th.daaam.proceedings.058 Malakov, I.; Georgiev, T.; Zaharinov, V.; Tzokev, A. & Tzenov, V.: Demand Modeling for the Optimization of Size Ranges
DOI:10.2507/26th.daaam.proceedings.059 Kafol, C.: Project Risk Management Methodology in Practice
DOI:10.2507/26th.daaam.proceedings.060 Raska, P. & Ulrych, Z.: Comparison of a Modified Self-Organizing Migrating Algorithm with other Selected Optimization Methods used for Different Testing Functions
DOI:10.2507/26th.daaam.proceedings.061 Husnjak, S.; Perakovic, D.; Forenbacher, I. & Jovovic, I.: Identification and Prediction of User Behavior Depending on the Context of the Use of Smart Mobile Devices
DOI:10.2507/26th.daaam.proceedings.062 Filaretov, V.; Zhirabok, A.; Zuev, A. & Protcenko, A.: Identification of Faults in Nonlinear Dynamic Systems
DOI:10.2507/26th.daaam.proceedings.063 Sremcev, N.; Cosic, I.; Anisic, Z.; Lazarevic, M. & Gecevska, V.: Procedure Phases for Configuration System Development
DOI:10.2507/26th.daaam.proceedings.064 Andreev, V.; Karbanov, V.; Kharin, K.; Kuvshinov, S.; Poduraev, Y. & Pryanichnikov, V.: Training Situation Center Based on Three-Dimensional Virtual Studio for Distributed Mobile Robotics Laboratory
DOI:10.2507/26th.daaam.proceedings.065 Chval, Z.; Raz, K. & Cechura, M.: Analysis of Stress Distribution in the Forging Press
DOI:10.2507/26th.daaam.proceedings.066 Gregor, M.; Krajcovic, M.; Hnat, J. & Hancinsky, V.: Genetic Algorithms in the Design and Planning of Production System
DOI:10.2507/26th.daaam.proceedings.067 Horman, I.; Busuladzic, I.; Hajro, I. & Beljak, N.: Optimization of friction parameters in the process of wood welding without additional adhesives
DOI:10.2507/26th.daaam.proceedings.068 Bicova, K. & Melichar, M.: Influence on the Shift the Product Precision of Machining Process and Eligibility
DOI:10.2507/26th.daaam.proceedings.069 Kana, J.; Vorel, I. & Ronesova, A.: Simulator of Thermomechanical Treatment of Metals
DOI:10.2507/26th.daaam.proceedings.070 Kuruc, M.: Machine Tool Loads in Rotary Ultrasonic Machining of Alumina, CBN and Synthetic Diamond
DOI:10.2507/26th.daaam.proceedings.071 Raz, K.; Cechura, M. & Chval, Z.: Upper Crossbeam of Free Forging Press Optimization in Order to Improve Mechanical Properties and Durability
DOI:10.2507/26th.daaam.proceedings.072 Zahalka, M.; Stanek, J. & Raz, K.: Cross Wedge Rolling and Forging Rolls as Additional Devices in Closed Die Forging
DOI:10.2507/26th.daaam.proceedings.073 Melichar, M.; Kutlwaser, J. & Kubatova, D.: Effect of Sweat Aggressiveness on Parameters of Surface Integrity
DOI:10.2507/26th.daaam.proceedings.074 Miroslav, Z. & Ivana, Z.: Influence of the Forging Process of the Machined Material on the Cutting Tool Life
DOI:10.2507/26th.daaam.proceedings.075 Isaenko, S.; Sochivko, O. & Dalyaev, I.: Analysis of Vibration Modelling Validity of Space-Borne Robotic System
DOI:10.2507/26th.daaam.proceedings.076 Isaenko, S.; Sochivko, O.; Shardyko, I. & Titov, V.: Simulation of Manipulator as a Part of Space Robotic System Weightlessness Device
DOI:10.2507/26th.daaam.proceedings.077 Ilves, R.; Kuut, A.; Birzietis, G.; Pirs, V.; Vlasov, A. & Olt, J.: The Difference Between the Physical Properties of Petrol and Alkylate Petrol and Impact on the Exhaust Gas of a Two-Stroke Engine
DOI:10.2507/26th.daaam.proceedings.078 Rao, P. S.; Jain, P. K. & Dwivedi, D. K.: Study and Effect of Process Parameters on External Cylindrical Surfaces of Titanium Alloys by Electro Chemical Honing (ECH) Process
DOI:10.2507/26th.daaam.proceedings.079 Totis, G.; Sortino, M. & Belfio, S.: Wavelet-like Analysis in the Frequency-Damping Domain for Modal Parameters Identification
DOI:10.2507/26th.daaam.proceedings.080 Salibekyan, S. & Panfilov, P.: Database Architecture for Specifying and Modeling Spatio-Temporal Relations
DOI:10.2507/26th.daaam.proceedings.081 Ilyukhin, Y. & Kolesnichenko, R.: Impedance Control of High-Precision Geared Servo Drives with Two Motors for Technological Robots
DOI:10.2507/26th.daaam.proceedings.082 Rahmani, M.; Krall, S. & Bleicher, F.: Numerical investigations on the static stiffness of industrial ball bearing linear guides
DOI:10.2507/26th.daaam.proceedings.083 Sivri, S.; Hennersdorf, S. & Krallmann, H.: Enhanced Method for Quality-fit (ISO 9001) Operations within the Automotive Industry
DOI:10.2507/26th.daaam.proceedings.084 Chernus, P.; Sharovatov, V. & Chernus, P.: Modelling of Two-Way Bellow Actuator Positioning
DOI:10.2507/26th.daaam.proceedings.085 Chernus, P.; Sharovatav, V. & Chernus, P.: Mathematical Model of Proportional Spool Valve
DOI:10.2507/26th.daaam.proceedings.086 Krall, S.; Lechner, C.; Nirtl, M. & Bleicher, F.: Robot based machine hammer peening using an electromagnetic driven hammering device
DOI:10.2507/26th.daaam.proceedings.087 Kramar, V.; Dushko, V.; Rodkina, A. & Alchakov, V.: Neural Network Modeling the Potential of Steels with Different Chrome Content
DOI:10.2507/26th.daaam.proceedings.088 Brocal, F.; Sebastian, M. A. & Gonzalez, C.: Classification proposal of metrological techniques in occupational safety and health
DOI:10.2507/26th.daaam.proceedings.089 Leokhin, Y.; Myagkov, A. & Panfilov, P.: GoMapReduce Parallel Computing Model Implementation on a Cluster of Plan9 Virtual Machines
DOI:10.2507/26th.daaam.proceedings.090 Mahmood, K.; Shevtshenko, E.; Karaulova, T.; Branten, E. & Maleki, M.: Troubleshooting Process Analysis and Development of Application for Decision Making Enhancement
DOI:10.2507/26th.daaam.proceedings.091 Nyrkov, A.; Chernyi, S.; Zhilenkov, A. & Sokolov, S.: The use of Fuzzy Neural Structures to Increase the Reliability of Drilling Platforms
DOI:10.2507/26th.daaam.proceedings.092 Schornik, V.; Zetek, M. & Baksa, T.: Durability of the Cutting Tool with Different Thin Layers when Inconel 718 is Machined
DOI:10.2507/26th.daaam.proceedings.093 Schornik, V.; Zetek, M. & Dana, M.: Modern Trends in Design and Testing of Milling Cutters
DOI:10.2507/26th.daaam.proceedings.094 Rusu, A. & Lohan, E.: Analysis of Real Mobility Records in Urban and Suburban Environments
DOI:10.2507/26th.daaam.proceedings.095 Rodríguez Prieto, A.; Camacho Lopez, A. M. & Sebastian, M. A.: New Decision Methodology for Selecting Manufacturing Codes of Nuclear Reactor Pressure-Vessels
DOI:10.2507/26th.daaam.proceedings.096 Kostolny, I. & Kolenak, R.: Investigation of the Influence of Alloying Elements in Zn-Al Alloy on Thermal and Mechanical Properties
DOI:10.2507/26th.daaam.proceedings.097 Kostolny, I.; Kolenak, R. & Barta, J.: Research of Wettability of In Solder on Al2O3 Ceramic During Laser Beam Heating
DOI:10.2507/26th.daaam.proceedings.098 Dana, M.; Zetek, M. & Schorník, V.: Effect of Cutting Edge Geometry on Cutting Tool Life when Drilling Inconel 718
DOI:10.2507/26th.daaam.proceedings.099 Dana, M.; Zetek, M. & Schorník, V.: Tapping Tool Life when Machining Inconel 718
DOI:10.2507/26th.daaam.proceedings.100 Klimov, D. & Poduraev, Y.: Robotic Flight Follower System for High Speed Recording
DOI:10.2507/26th.daaam.proceedings.101 Andreev, V.; Pletenev, P. & Poduraev, Y.: The Method of Network Control of Robotic Systems of Different Models and Manufacturers
DOI:10.2507/26th.daaam.proceedings.102 Ivan, C.; Vujic, M. & Husnjak, S.: Classification of Security Risks in the IoT Environment
DOI:10.2507/26th.daaam.proceedings.103 Hanzl, P.; Zetek, M. & Zetkova, I.: Testing of Special Ni-Mo Steel and its Suitability for Cutting Tools
DOI:10.2507/26th.daaam.proceedings.104 Hanzl, P.; Zetek, M. & Zetkova, I.: Cellular Lattice Structure Produced by Selective Laser Melting and its Mechanical Properties
DOI:10.2507/26th.daaam.proceedings.105 Kroupa, T.; Schornik, V.; Dana, M. & Zetek, M.: Comparing the Effects of Modifying Milling Tool Geometry on Durability
DOI:10.2507/26th.daaam.proceedings.106 Filaretov, V. & Konoplin, A.: Experimental Definition of the Viscous Friction Coefficients for Moving Links of Multilink Underwater Manipulator
DOI:10.2507/26th.daaam.proceedings.107 Polcar, J.; Gregor, M.; Horejsi, P. & Kopecek, P.: Methodology for Designing Virtual Reality Applications
DOI:10.2507/26th.daaam.proceedings.108 Breido, I.; Voytkevich, S.; Em, G. & Kaverin, V.: Alternative Sources of Supply for Stand-Alone Automation Devices on Supports High-Voltage Lines
DOI:10.2507/26th.daaam.proceedings.109 Gebel, E.: Estimation Workspace of 6 DOF Hauff platform
DOI:10.2507/26th.daaam.proceedings.110 Bas, G.; Durakbasa, N. M.; Mankova, I. & Vrabel, M.: An innovative approach of metrology for high precision and quality machining tool assessment in the integrated production engineering
DOI:10.2507/26th.daaam.proceedings.111 Perlova, E.; Platonova, M.; Pankova, A.; Nemova, D.; Petrichenko, M. & Rakova, X.: The analysis of efficiency using coil meshes with air pockets under plastering composition
DOI:10.2507/26th.daaam.proceedings.112 Rubesova, K.; Jirkova, H.; Masek, B. & Vorel, I.: Effect of Mini-Thixoforming Parameters on Microstructural Evolution in Low-Alloy Steel
DOI:10.2507/26th.daaam.proceedings.113 Abramov, A. & Blyankinshtein, I.: Electronic Control System of Rotating Axes of Long Based Road Train
DOI:10.2507/26th.daaam.proceedings.114 Tan, K. L. & Yeo, S. H.: Cavitation Erosion Study in Deionized Water Containing Abrasive Particles
DOI:10.2507/26th.daaam.proceedings.115 Finkeldei, D. & Bleicher, F.: Investigation of Coolants in Machining of Titanium Aluminides
DOI:10.2507/26th.daaam.proceedings.116 Abdessemed, A. C. & Viba, J.: Aerodynamic and Motion Study of Flapping Wings Vehicle
DOI:10.2507/26th.daaam.proceedings.117 Mikulcic, M.; Modric, M. & Sumpor, D.: Application Possibility of Engine Drivers' Body Segments Ratios in Designing the Cab' Working Environment in Croatia
DOI:10.2507/26th.daaam.proceedings.118 Clares Rodriguez, J. M.; Vazquez Martinez, J. M.; Gomez-Parra, A.; Puerta Morales, F. J. & Marcos, M.: Experimental Methodology for Evaluating Workpieces Surface Integrity in Dry Turning of Aerospace Alloys
DOI:10.2507/26th.daaam.proceedings.119 Antos, J. & Kubalcik, M.: Alternative Approach to Optimization in Model Predictive Control Using Hill Climbing Algorithm
DOI:10.2507/26th.daaam.proceedings.120 Lopota, A.; Dalyaev, I.; Shardyko, I.; Kuznetcova, E. & Belezyakov, I.: Means of Robotic Support for On-Orbit Servicing
DOI:10.2507/26th.daaam.proceedings.121 Potapov, A.; Stazhkov, S.; Gradovtsev, A.; Dalyaev, I. & Ohochinsky, M.: Structures of automatic systems with unstable parameters
DOI:10.2507/26th.daaam.proceedings.122 Shah, R.; Park, H. & Lee, G. B.: Design For Assembly: An approach to increase Design Efficiency of Electronics Home Appliance
DOI:10.2507/26th.daaam.proceedings.123 Blyankinshtein, I.; Voevodin, E. & Ruban, A.: Techniques of Adjusting Opacity Estimates of the Diesel Exhaust Gases
DOI:10.2507/26th.daaam.proceedings.124 Cubrova, J.; Vorel, I.; Vancura, F. & Masek, B.: Effect of Amount of deformation on Microstructure Evolution During Controlled Cooling of Forgings from Finish-Forging Temperature
DOI:10.2507/26th.daaam.proceedings.125 Vorotnikov, A.; Bashevskaya, O.; Ilyukhin, Y.; Romash, E.; Isaev, A. V. & Poduraev, Y.: Geometrical Approach for Industrial Robot Axis Calibration Using Laser Tracker
DOI:10.2507/26th.daaam.proceedings.126 Smirnova, E.; Stepanov, D. & Goryunov, V.: A Technique of Natural Visual Landmarks Detection and Description for Mobile Robot Cognitive Navigation
DOI:10.2507/26th.daaam.proceedings.127 Stojkic, Z.; Veza, I. & Bosnjak, I.: A Concept of Information System Implementation (CRM and ERP) within Industry 4.0
DOI:10.2507/26th.daaam.proceedings.128 Spirk, S. & Kepka, M.: Effects of Dynamic Forces and Strain Rate During Battery-Electric Bus Impact
DOI:10.2507/26th.daaam.proceedings.129 Calvino Fernandez-Trujillo, A.; Rivero, A.; Alvarez, M.; Puerta, F. J.; Salguero, J. & Marcos, M.: Implementing Incremental Sheet Metal Forming on a CNC Machining Centre
DOI:10.2507/26th.daaam.proceedings.130 Sedlacek, F.; Lasova, V. & Kottner, R.: Design of Flexible Composite Bellows Coupling
DOI:10.2507/26th.daaam.proceedings.131 Lazarev, I.: Numerical study on capabilities constructions of electromagnetic acoustic transducers (EMAT) with permanent magnets for inline inspection of pipeline 6”
DOI:10.2507/26th.daaam.proceedings.132 Ropus, I.; Carcia, G.; Giorcelli, M.; Tagliaferro, A.; Haramina, T. & Curkovic, L.: Mechanical Properties of Epoxy/Multi-Walled Carbon Nanotubes Composites
DOI:10.2507/26th.daaam.proceedings.133 Hajicek, Z.: Simulation of Virtual Machine Tool During the Development Phase
DOI:10.2507/26th.daaam.proceedings.134 Hnatik, J.; Kutlwaser, J. & Sklenicka, J.: iMachining Cutting Force Measurement
DOI:10.2507/26th.daaam.proceedings.135 Hnatik, J.; Kroft, L. & Kutlwaser, J.: Constant Chip Volume Machining
DOI:10.2507/26th.daaam.proceedings.136 Janda, P. & Polak, R.: Virtual Prototyping and Optimization of Heavy Machine Tools
DOI:10.2507/26th.daaam.proceedings.137 Malael, I.; Dragan, V. & Gherman, G. B.: Turbulence Intensity Effects on the Vertical Axis Wind Turbine Starting Efficiency
DOI:10.2507/26th.daaam.proceedings.138 Boenzi, F.; Digiesi, S.; Facchini, F.; Mossa, G. & Mummolo, G.: Greening Activities in Warehouses: A Model for Identifying Sustainable Strategies in Material Handling
DOI:10.2507/26th.daaam.proceedings.139 Bogachev, A.; Kuzmenko, D. & Lazarev, E.: The Use of Walking Mechanisms as an Adaptive Suspension of a Planet Rover
DOI:10.2507/26th.daaam.proceedings.140 Weingerl, D.; Kubinger, W. & Engelhardt-Nowitzki, C.: Preceding Vehicle Tracking in Stereo Images via 3D Feature Matching
DOI:10.2507/26th.daaam.proceedings.141 Valerga, A. P.; Batista, M.; Fernandez, S. R.; Gomez-Parra, A. & Barcena, M.: Preliminary Study of the Influence of Manufacturing Parameters in Fused Deposition Modeling
DOI:10.2507/26th.daaam.proceedings.142 Dosek, R.; Janku, P.; Bliznak, M. & Varacha, P.: Secure High Level Communication Protocol for CAN Bus
DOI:10.2507/26th.daaam.proceedings.143 Yerofeyev, S.; Ipatov, O.; Markov, S.; Potekhin, V.; Sulerova, A. & Shkodyrev, V.: Adaptive Intelligent Manufacturing Control Systems
DOI:10.2507/26th.daaam.proceedings.144 Janku, P.; Koplik, K.; Dosek, R.; Dulik, T.; Bliznak, M. & Varacha, P.: Context sensitive fire protection system
DOI:10.2507/26th.daaam.proceedings.145 Chrobak, P.; Zalesak, M. & Sehnalek, S.: Photovoltaics and its Potential Application in the Production of Electricity
DOI:10.2507/26th.daaam.proceedings.146 Saikaew, C. & Poolpraserd, C.: Effect of Rice Husk on the Sand Mold Properties and the Quality of Cast Iron
DOI:10.2507/26th.daaam.proceedings.147 Drabek, P.; Zalesak, M. & Oplustil, M.: The Impact of the Heat Accumulation on Energy Efficiency of Building
DOI:10.2507/26th.daaam.proceedings.148 Tolea, B.; Trusca, D.; Antonya, C. & Beles, H.: The Influence of the Frontal Profile Design of a Vehicle upon the Pedestrian Safety at Low Velocity
DOI:10.2507/26th.daaam.proceedings.149 Ivanova, O.; Dushko, V. & Rodkina, A.: Experimental Researches Automation of Spatial Oscillations of the Floating Ocean Engineering Systems in the Wave Basin
DOI:10.2507/26th.daaam.proceedings.150 Korponai, J.; Banyai, A. & Illes, B.: The Effect of the Demand-Changes on the Inventories
DOI:10.2507/26th.daaam.proceedings.151 Fajsi, A.; Tekic, Z. & Moraca, S.: Open Innovation in Manufacturing SMEs – Integration into Value Networks
DOI:10.2507/26th.daaam.proceedings.152 Medojevic, M.: Analysis of Current Automation Level in Specific Compressed Air System with Model for Optimization
DOI:10.2507/26th.daaam.proceedings.153 Gajic, S.; Palcic, I. & Cosic, I.: Complexity Perspective and Engineering Systems – Novel Approaches
DOI:10.2507/26th.daaam.proceedings.154 Gregor, M.; Haluska, M.; Fusko, M. & Grznar, P.: Model of Intelligent Maintenance Systems
DOI:10.2507/26th.daaam.proceedings.155 Rakyta, M.; Fusko, M.; Haluska, M. & Grznar, P.: Maintenance Support System for Reconfigurable Manufacturing Systems
DOI:10.2507/26th.daaam.proceedings.156 Martinek, T.; Kudelka, J.; Navratil, M. & Kresalek, V.: Characterization of Epitaxial Layers Using Scanning Microwave Microscopy
DOI:10.2507/26th.daaam.proceedings.157 Gregor, M.; Grznar, P.; Pedan, M. & Cudrakova, M.: Knowledge in Healthcare
DOI:10.2507/26th.daaam.proceedings.158 Kuncar, A.: Basic Techniques for Filtering Noise Out of Accelerometer Data
DOI:10.2507/26th.daaam.proceedings.159 Jatsun, S.; Savin, S.; Yatsun, A. & Turlapov, R.: Locomotion Control Method for Patients Verticalization with Regard to their Safety and Comfort
DOI:10.2507/26th.daaam.proceedings.160 Ertel, J.; Barta, J. & Maronek, M.: Case Study of Electron Beam Welding in Automotive Industry
DOI:10.2507/26th.daaam.proceedings.161 Chernyshev, V.; Arykantsev, V.; Kalinin, Y.; Gavrilov, A. & Sharonov, N.: Development of the walking mover for underwater walking vehicle
DOI:10.2507/26th.daaam.proceedings.162 Kukushkin, I.; Zavrazhina, A.; Grabenweger, J.; Kildibekov, A.; Katalinic, B. & Haskovic, D.: Model-based concept for scheduling analysis of packaging lines
DOI:10.2507/26th.daaam.proceedings.163 Haskovic, D.; Katalinic, B.; Kildibekov, A. & Kukushkin, I.: Intelligent Adviser Module for Bionic Assembly Control System: Functions and Structure Concept
DOI:10.2507/26th.daaam.proceedings.164 Mansour Fallah, S.: Multi Agent based Control Architectures
DOI:10.2507/26th.daaam.proceedings.165 Galiev, I.; Shiler, A. & Shiler, V.: Assembly and dynamics tests of newly designed flexible railway wheelset

 

 

 

Comments are closed.

Last modified on: April 8th, 2016.