22nd DAAAM International Symposium

Editorial

Contents

 

Conference papers

1 Celar, S.; Seremet, Z. & Turic, M.: Cloud Computing: Definition, Characteristics, Services and Models
2 Filaretov, V. F.; Zhirabok, A. N. & Zuev, A.: The Synthesis of Robust Feedback for Diagnostic Observers of Navigation Sensors of Autonomus Underwater Vehicle
3 Popescu, D.; Buzatu, D. S.; Gavrila, R. & Popescu, M. C.: Establishing the Longitudinal Elasticity Modulus of Recoverable Silicone Rubber
4 Maric, I.: Excellence of Nonprofit Organization
5 Balkovic, M. & Kristof, T.: Methodology of Qualification Standard Development in ICT Based on Competences Matrix Model
6 Blecha, P. & Prostrednik, D.: Influence on the Failure Probability
7 Trnka, P.; Pihera, J.; Polansky, R.; Prosr, P. & Mentlik, V.: Transformer Insulation – Modifications in Liquid Part
8 Matulja, D. & Dejhalla, R.: Genetic Algorithm Optimization of a Ship's Bulbous Bow
9 Vazan, P.; Kebisek, M.; Tanuska, P. & Jurovata, D.: The Data Warehouse Suggestion for Production System
10 Tomasegovic, T.; Cigula, T.; Mahovic Poljacek, S. & Gojo, M.: Wetting of CTP Offset Plate as a Function of Developing Process
11 Andreev, V. P. & Pryanichnikov, V. E.: Operation Environment of Mobile Robots with Supervision Control
12 Staroveski, T.; Brezak, D.; Udiljak, T. & Majetic, D.: Experimental Machine Tool for Process Monitoring and Control Systems Research
13 Jirkova, H.; Kucerova, L.; Masek, B. & Meyer, L. W.: Refinement of Trip Steel Microstructure by Incremental Deformation
14 Markovic, M.; Knego, N. & Vouk, M.: Impact of Technology on Development of Retail Services
15 Bibire, L.; Ghenadi, A. S. & Topliceanu, L.: Maintenance-Reliability Duality for a 40 Bars Compressor from a Pet Bottling Line
16 Prosr, P.; Polansky, R. & Mentlik, V.: Infrared Spectroscopy of the Regenerated Mineral Insulating Oil
17 Park, H. S. & Park, J. W.: Application Method of Augmented Reality Including FEM to Manufacturing System
18 Park, H. S. & Le, N. T.: A 3D Simulation System for Mobile Harbourcrane Based on Virtual Prototyping Technology
19 Ravas, R. & Syrova, L.: Use of Improved Iterative Correction of Radial Distortion
20 Gusel, L.: Analysis of Elastic Recovery Phenomena in Bending Process
21 Kumicakova, D.: Approach to the Welding Cable Bundle 3D Modelling for Off-Line Programs Application
22 Sturm, B.; Smith, T. R.; Joyce, S. & Roskilly, A. P.: Process Modelling of Waste Heat Recovery in the Food Manufacturing Sector
23 Macura, D.: Image of the Roughness Surface by the Integrals Curves
24 Kostic, A. & Velic, M.: A (2,3)-Pade Approximation of Secular Function of Toeplitz Matrix
25 Kostic, A.: Numerical Analysis of Secular Functions of a Real Symmetric Positive Definite Toeplitz Matrix
26 Kostic, A.: A Critical Review of Mises Method Applied to the Toeplitz Matrix
27 Kostic, A.: A New Strategy for Toeplitz Matrix
28 Jurko, J. & Panda, A.: Study of Machinability of ELC Stainless Steel X2Cr20Ni10MoTi and Accompanying Phenomena in the Cutting Zone During Drilling
29 Neumann, P.; Adamek, M. & Skocik, P.: How Can V-I Characteristics Help in Counterfeit Component Detection
30 Circiumaru, A.; Bria, V.; Roman, I.; Andrei, G.; Dima, D. & Birsan, I. G.: Physical Properties of Filled Epoxy Composites
31 Budic, H. & Andrlic, B.: Measuring Students' Satisfaction and its Importance for Improving Marketing Mix of Services in Higher Education
32 Cubonova, N.: Utilization of Genetic Alghoritms by the Tool Path Programming
33 Bal, C. & Bal, N.: Transmission of the Caloric Effects by the Oscilanting Waves
34 Popovici, D.; Jiga, G. – G. & Dinu, G.: Finite Element Analysis using Piezoelectric Transducers Modeling
35 Barreiro, J.; Martinez Pellitero, S.; Gonzalez Madruga, M.; Gonzalez – Madruga, D. & Gonzalez, J.: Framework for an Integrated Ontology Definition in the Scope of CMM Inspection Planning Using CBR
36 Suarez Castrillon, S. A.; Barreiro, J.; Alegre, E.; Garcia Ordas, M. T. & Garcia – Olalla, O.: Material Surface Characterization Using Laws Descriptors
37 Agic, D.; Mandic, L.; Strgar Kurecic, M.; Poljicak, A. & Agic, A.: Black Printer Neutrals Distribution Using K and CMY Components
38 Gheorghe, I. G.; Cirstoiu, C. A.; Istriteanu, S. – E. & Despa, V.: Intelligent Integrative Micro-Nano-Robotics
39 Gheorghe, I. G.; Cirstoiu, C. A.; Istriteanu, S. – E. & Despa, V.: New Concepts and Solutions of Micro-Nano-Mechatronics and Micro-Nano-Integronics
40 Pihera, J.; Mentlik, V. & Trnka, P.: Inductive Rotary Probe for Partial Discharge Diagnostics
41 Grigorescu, C. – M.; Moraru, S. – A.; Kristaly, D. M. & Badea, M.: DB4Objects Based Buffering Application for Use in Software Monitoring Systems
42 Jakovic, B.; Knezevic, B. & Strugar, I.: Student Perception of Online Shopping and Web 2.0 Tools: The Case of Croatia
43 Dana, I. F. & Badea, A.: Studies Regarding the Use of Remote Sensing Satellite Data for the Identification of Heavy Metal Pollution in Agricultural Fields
44 Kostanjevec, T.: Development of New Product in the Fuzzy Front End Stage with Multi-Criteria Approach
45 Blaskovic, B.; Randic, M. & Dembitz, S.: Scenarios and Model Based Design
46 Banasova, L.; Caganova, D.; Cambal, M. & Sujanova, J.: The Identification Procedure for Key Managerial Competencies in Industrial Enterprises
47 Runje, B. & Medic, S.: Measurement Uncertainty in Process of Line Scales Calibrating
48 Ruzarovsky, R.; Sebenova, S. & Velisek, K.: Design of the Sensory System In the Intelligent Assembly Cell
49 Albers, A.; Sommer, H.; Frietsch, M. & Tremmel, C.: Investigation of Disturbances on a Novel Reinforcement Learning Based Control Approach
50 Albers, A.; Yu, X. & Sommer, H.: Effects of Initial Knowledge on Reinforcement Learning Based Control
51 Skocik, P.; Gona, S. & Kresalek, V.: Fullwave Modelling of Shielding Effectiveness of Metalized Textiles
52 Skocik, P. & Neumann, P.: Circuit Design for Measurement of Force in Biaxial Area
53 Mironeasa, S.; Gutt, G.; Gutt, S. & Mironeasa, C.: Study Regarding the Association Between Mechanical Parameters, Chemical Composition and Erichsen Index
54 Mironeasa, S.; Gutt, S.; Gutt, G. & Codina, G. – G.: Rheological Behaviour of Wheat Flour Dough During Mixing and Heating
55 Florea, T.; Pruiu, A.; Bejan, M.; Serbanescu, I.; Catana, D. & Vasile, F.: Calculus of Stirling Engines Performances Using the First Law for Finite Speed Processes
56 Florea, T.; Pruiu, A.; Bejan, M.; Serbanescu, I.; Catana, D. & Vasile, F.: Calculus of the Coefficient of Regenerative Losses in Stirling Machines
57 Kaposta, I. & Otlacan, D. D.: Frontal Harmonic Transmissions (FHT): Study of Elastic Deformations of the Flexible Wheel
58 Janacova, D.; Vasek, V.; Mokrejs, P.; Krenek, J. & Drga, R.: Temperature Fields Solving in Two-Layer Plate with Comsol Multiphysics Software
59 Piska, M. & Slany, M.: On the Reaming of Austenitic Steels with Coated Cermets
60 Boicea, A.; Capitanescu, I.; Radoi, C. D. & Petre, M. – R.: Video Metadata in Web Based Applications
61 Boicea, A.; Magdalina, C.; Ionescu, D. – C.; Radulescu, F. & Popa, G. D.: An Architecture for Distributed Databases on Workstations
62 Malina, J.; Masek, B. & Behulova, M.: Influence of the Surface Quality on the Stress State During Rotary Bending Test
63 Gordan, C. E.; Gordan, I. M. & Pop, P. A.: The Method Used for Building of Drill Cutter for Deep Hole Drilling
64 Terziqi, A. K.; Mulliqi, I. S.; Bajraktari, B. V. & Mehush Rifat, A.: The Flow of Thermal Energy from Gases of Electric Furnace in the Charge of Rotary Furnace
65 Palcic, I.; Buchmeister, B.; Pavlinjek, J. & Vedenik, G.: Review of Future Changes and Challenges of Production Companies
66 Prokopova, Z.; Silhavy, P. & Silhavy, R.: Demonstration of Operating Data Analysis by Business Intelligence Development Studio
67 Salihu, A. H.; Zeqiri, H. M.; Bunjaku, A.; Qehaja, N. E.; Osmani, H. & Zeqiri, F.: Research of the Height Parameters of the Machined Surface
68 Perutka, K.: Multiple Model Feedback Control of Systems with Nonsmooth Nonlinearities
69 Perutka, K.: Distance Learning of MATLAB Programming
70 Mihailidis, A. K. & Pupaza, C.: Multicriteria Optimization of Planetary Systems
71 Krzelj – Colovic, Z. & Mihajlovic, I.: The Improving of Business Efficiency in Relationship Between Tour Operators and Shme's Using the ICT
72 Pitel, J. & Mizak, J.: Approximation of Co/Lambda Biomass Combustion Dependence by Artificial Intelligence Techniques
73 Pitel, J.; Neydorf, R. & Borzikova, J.: Arm Position Simulation of Pam Based Actuator
74 Kefer, M. & Kubinger, W.: Evaluation of Kinect Depth Sensor for Use in Mobile Robotics
75 Kolibal, Z. & Smetanova, A.: Contribution to Ergonomic Operating of Spring-Actuated Mechanism
76 Dragomirescu, C. G. & Iliescu, V.: Aspects of the Dynamics of Pneumatic Switches
77 Marcos, M.; Gomez – Lopez, A. J.; Batista Ponce, M.; Salguero, J. & Gamez, A. J.: Roughness Based Study of Milled Composite Surfaces
78 Stanek, M.; Manas, M.; Manas, D.; Kyas, K.; Navratil, J. & Senkerik, V.: Injection Molding Process and its Optimization
79 Stanek, M.; Manas, M.; Manas, D.; Kyas, K.; Pata, V. & Senkerik, V.: Rapid Prototyping the Fast Tool for Model Production
80 Stanek, M.; Manas, D.; Manas, M.; Ovsik, M.; Skrobak, A. & Krumal, M.: Thermal Effects on Metals at Plasma Cutting
81 Zavec Pavlinic, D.; Balic, J. & Mekjavic, I.: Thermal Manikins as Effective Tools for Assessment of Thermal Comfort
82 Georgescu, L. E.; Dobrescu, T. G. & Iliescu, M.: The Training Optimization of Engineers for Manufacturing Systems
83 Hricova, B.; Nakatova, H. & Badida, M.: Principles of Design for the Life-Cycle
84 Rasti, J.; Monadjemi, S. A. & Vafaei, A.: A Graph-Based Vision System for Automatic Object Detection in Outdoor Scenes
85 Miclosina, C. – O.; Campian, C. V. & Frunzaverde, D.: Finite Element Analysis of an Outer Bearing Bush of a Kaplan Turbine
86 Vesely, L. & Pohl, L.: Possibility of Sensorless Control for IPMSM in Low Speed Range
87 Noskievicova, D.; Pauchova, A. & Kelblerova, M.: Analysis of Effective Implementation of SPC
88 Coman, D.; Vrinceanu, N. & Popovici, E.: Reducing the Environmental Impact of Textile Dyes Containg Wastewater by Photocatalytic Degradation with Zincoxide Nanocoated Fibers
89 Dolinay, V.; Vasek, V. & Pivnickova, L.: The Evaluation of Audiometric Result
90 Kavran, Z.; Jolic, N.; Mostarac, K.; Brnardic, M. & Petrovic, I.: Implementation of River Information Services in the Republic of Croatia
91 Duris, R. & Labasova, E.: Determination of the Stress Concentration Factor Using FEM
92 Bolanca Mirkovic, I.; Majnaric, I. & Bolanca, Z.: Recycling of the Waste Paper and the Handsheets Forming
93 Bolanca Mirkovic, I.; Majnaric, I. & Bolanca, S.: Enviromental Sustainability and Graphic Production
94 Kralikova, R.; Wessely, E. & Rusko, M.: The Use of Six Sigma Method within the Framework of Environmental Management
95 David, O.; Osiceanu, S. & David, M. F.: How the Economic Crisis Affects the Companies Management
96 Kremljak, Z.: Qualitative Analysis of Project Risk
97 Monkova, K. & Monka, P.: Relationship of Surface Roughness and Machining Productivity
98 Holm, T.; Lehmann, O. & Horn, S.: Reference Model Based Design of Tool Landscapes for Rail Infrastructure Engineering
99 Buchman, I. & Ignaton, E.: The Chemical Resistance of an Ultra-High Performance Concrete
100 Tittel, V.; Zelenay, M. & Sobota, R.: Dies Geometry Influence in Wires Treatment in Ropery
101 Martinkovic, M.; Kapustova, M. & Kravarik, L.: Optimization and Verification of Warm Forging Temperature of Steel
102 Vrinceanu, N.; Coman, D.; Popovici, E.; Brinza, F. & Nica, V.: Functional Finishing of Fibrous Substrates Coated with Ag-Deposited TiO2 Nanoparticles
103 Bucki, R. & Chramcov, B.: Conceptual Modeling of the Serial Logistic System
104 Pupavac, D.: The Analysis of Entrepreneurial Activity of Students of Professional Studies
105 Prodan, D.; Bucuresteanu, A. M. & Balan, E.: Heavy Machine-Tools: Modularized Hydraulic Installations
106 Skuflic, L.; Galetic, F. & Herceg, T.: The Role of Social Networks in Teaching of Economic Theory
107 Dusek, D.: Research of Mems Sensor Based on Mechanical Filter Bank
108 Novakovic, B.; Majetic, D.; Kasac, J. & Brezak, D.: Some Problems and Solutions in Nanorobot Control
109 Stamin, D.; Stamin, C.; Marinescu, M. & Buciu, C.: Object Correlation Based on Relation Density
110 Stamin, D.; Stamin, C.; Marinescu, M. & Alexei, A. – M.: Automatic Checking of Vector-Raster Alignment for Georeferenced Data
111 Pilipovic, A.; Sercer, M.; Stojanovic, I.; Brajlih, T.; Drstvensek, I. & Valentan, B.: Laminated Object Manufacturing vs. Fused Deposition Modeling – Machine Comparison
112 Popescu, C.; Paraschiv, N. & Cangea, O.: Comparison Between PID and Fuzzy Controllers Used in Mobile Robot Control
113 Volkova, N. & Prokop, R.: Matrix Equation Approach for Mimo Control Design
114 Macura, A.; Missoni, E. & Makovic, B.: Quality of Service in Multimedia Computer Networks
115 Covo, P.; Grzan, M. & Covo, A.: Intelligent Robotic Systems in Surgery
116 Tonoiu, S.; Doicin, C. – V.; Catana, M. – G. & Baila, D.: New Informational Symbols for Holding and Driving Mechanisms Used for Machining Shafts Between Centers
117 Vintila, G.; Armeanu, D. & Nedelescu, M.: Analysis of the Main Factors of Optimisation of Long Term Financing Structure of Romanian Enterprises
118 Mikhaylov, M.; Larchikov, I. A.; Yurov, A. V.; Cvetkov, V. & Stazhkov, S.: Hydromechanical Constant Speed Drive Forwind-Driven Generators
119 Matysek, M.; Adamek, M.; Neumann, P. & Karafiat, T.: The Mobile Monitoring and Controlling of Real Systems via the UMTS
120 Kapustova, M. & Martinkovic, M.: Plasticity and Workability of Aluminium Alloy at Warm Temperatures
121 Buransky, I.; Vaclav, S.; Pokorny, P. & Benovic, M.: Fundamental Facts About Manual Assembly Systems
122 Zuperl, U.; Cus, F. & Balic, J.: Real Time Control of Clamping in an Intelligent Fixturing System
123 Cernecky, J.; Koniar, J. & Brodnianska, Z.: Impact of Lower Heat Exchange Plate's Geometry on Heat Transfer in Horizontal Channel
124 Damic, V.; Cohodar, M. & Kulenovic, M.: Physical Modeling and Simulation of Mechatronics Systems by Acausal Bond Graphs
125 Karic, E.; Sunje, A.; Pasic, M. & Bijelonja, I.: Corporation Financial Performances and Supervisory Board
126 Karic, E.; Vucijak, B.; Pasic, M. & Bijelonja, I.: Multicriteria Evaluation of Supervisory Boards Effectiveness
127 Bulej, V.; Stoianovici, G. – V. & Poppeova, V.: Material Flow Improvement in Automated Assembly Lines Using Lean Logistics
128 Duda – Daianu, D. C. & Harangus, D.: The Analyse of Management Performance for Light Industries' Enterprises
129 Filaretov, V. F.; Zhirabok, A. N.; Shumsky, A. Y. & Suvorov, A.: Robust Fault Diagnosis in Linear Systems
130 Jurum Kipke, J.; Sumpor, D. & Musabasic, N.: Cognitive Ergo-Assessment of Human Factor During Manual Toll Collection
131 Vojtko, I. & Mikita, J.: Monitoring of Rheological Properties of Polypropylene
132 Vojtko, I. & Mikita, J.: Method of Projecting Modular Structures for Manufacturing Technology
133 Dragicevic, M. & Letunic, S.: The Influence of International Standard ISO 9001 Implementation on the Human Resource Management in Hotels
134 Tomic, T.; Kasac, J. & Milic, V.: Rigid Body Attitude Control with Complete Rejection of Unknown External Disturbances
135 Anic, L.; Kasac, J. & Novakovic, B.: Passive Sliding-Mode Synchronization of Multi-Robotic Systems with Structural Uncertainties and External Disturbances
136 Markova, P.; Prajova, V. & Salgovicova, J.: The Internet and Integrated Marketing Communications
137 Sysala, T. & Neumann, P.: The Real Equipment Models Laboratory and their Control Possibilities
138 Butala, P. & Oosthuizen, G.: A Sustainable Manufacturing Network Model for Socio-Economic Development
139 Dubau, C. & Catas, A.: Assessment of Energy Production and Energy Balance for the Adaptation of Wind Micro-Aggregates at a Comparative Analysis
140 Catas, A. & Dubau, C.: On an Application of Neighborhood for a Class of Harmonic Univalent Functions
141 Bagnaru, D. G.; Stanescu, M. M.; Bolcu, D.; Miritoiu, C. M.; Rizescu, S. V. & Diaconu, I.: Comparison Between the Transversal Displacements Field of the Linear Elastic Road of Straight Bar Type Being in Forced Vibration or in Rest
142 Stanescu, M. M.; Bagnaru, D. G.; Bolcu, D.; Miritoiu, C. M.; Rizescu, S. V. & Diaconu, I.: A Comparison Between the Transversal Displacements Fields, of a Linear Viscoelastic Connecting Rod, Which Is in Vibration or in Rest
143 Birsan, I. G.; Roman, I.; Bria, V.; Ungureanu, V. & Circiumaru, A.: Starch – Epoxy Composites
144 Misak, S.; Prokop, L. & Kacor, P.: Small Smart House
145 Popa, D. M. & Nica Cotet, G. B.: Trust and Social Capital in the Virtual Organization
146 Bria, V.; Circiumaru, A.; Birsan, I. G.; Andrei, G.; Dima, D. & Roman, I.: Fabric Reinforced Laminae and Laminates with Starch-Epoxy Matrix
147 Svetstky, S.; Moravcik, O.; Stefankova, J. & Schreiber, P.: An Experiment with Enhanced Learning in Engineering Education
148 Pugna, A. P.; Mocan, M. L.; Negru Strauti, G. & Giuca, M. G. O.: Using Doe to Improve Sintered Basalt Mechanical Properties
149 Cociu, N.; Taroata, A. & Taucean, I. M.: Possibilities to Optimise Scheduling Production
150 Topliceanu, L.; Bibire, L. & Ghenadi, A. S.: Research on the Power Loss in the Hydrostatic Valves
151 Topliceanu, L.; Bibire, L. & Ghenadi, A. S.: Determining the Organic Micropollutants through the Gas Chromatography Method
152 Micieta, B.; Dulina, L. & Smutna, M.: New Approach of Ergonomics Workplace Design
153 Kondratenko, Y. P. & Gordienko, E.: Neural Networks for Adaptive Control System of Caterpillar Turn
154 Palka, J.: Visualization of Overlapping of Scanned Areas at Mean Radiant Temperature Measurement
155 Perakovic, D.; Kuljanic, T. – M. & Musa, M.: XaaS Services as Modern Infrastructure of ITS
156 Yukhimets, D. A. & Filaretov, V. F.: Synthesis Method of System for Automatic Correction of Underwater Vehicle Program Signals of Movement
157 Kolosowski, M. & Chwastyk, P.: Cost of Activities in the Quality Cost Account
158 Bilik, J.; Pompurova, A.; Ridzon, M. & Suba, R.: Theoretical Analysis and Rubber Pad Bending of Selected Materials Chosen
159 Livinti, P. T. & Stoleru, A.: Computerized Control and Monitoring of an Electric Driving System
160 Dobre, D.; Simion, I.; Ionita, E. & Dobrescu, T. G.: Modal Analysis of the Metallic Membrane from Elastic Coupling Structure
161 Bijelonja, I.: A Numerical Method for Almost Incompressible Body Problem
162 Bijelonja, I.: A Finite Volume Method for a Geomechanics Problem
163 Kristaly, D. M.; Moraru, S. – A. & Grigorescu, C. – M.: Multi-Purpose Modular Software Platform for Rapid Development of Web Applications
164 Hilma, E.; Mierlita, D. & Teusdea, A. C.: Fourier Correlation Analysis of GC-Spectra of Sheep Milk and Dairy
165 Bozek, P.; Ondriga, M. & Hrdlickova, Z.: Automation of Workplace Ergonomics Setting Based on Image Processing
166 Bozek, P. & Chmelikova, G.: Implementation of Robot Offline Programming
167 Bozek, P. & Suriansky, J.: Research Into the Utilization of an Inertial Navigation System in Robotics
168 Bozek, P.; Trnka, K.; Knazik, M. & Ondriga, M.: Robot Pose Correction for Offline Programming of Industrial Robot Systems
169 Dumitrescu, C. D.; Tent, I. D.; Cornu, G.; Trandafir, N. & Irimie, S. I.: Same Aspects Regarding Production Management in Small and Medium Industries Under European Community Integration Conditions
170 Nagla, K. S.; Moin, U.; Singh, D. & Rathi, N.: Sensor Fusion Frame Work for Marble/Stone Processing Industry Using Low Cost Sensors
171 Sugar, P.; Sugarova, J. & Kolnik, M.: A New Sheet Metal Parts Classification and Coding System
172 Obucina, M.; Smajic, S. & Skaljic, N.: Effect of Adhesive Strength of Bonded Area Surface
173 Ciupitu, L.; Brotac, S. & Ivanescu, N. A.: On the Controlling of the Coilers from a Metal Extrusion Press
174 Moroianu, C. & Iurea, N.: Numerical Determination Method of Crankshaft Neck Stresses of Marine Engines
175 Zitinski Elias, P.; Poljicak, A.; Strgar Kurecic, M. & Mandic, L.: Behavior of Web Safe Colors With Different Print Production Profiles
176 Konieczny, R.: Robot Programming for Surface Scanning Based on Data from Photogrammetry
177 Poppeova, V.; Bulej, V. & Uricek, J.: Parallel Kinematic Structures and Their Innovative Applications
178 Hruska, F.: Aspects of Enlargement of the Photovoltaic System- DE10
179 Haramina, H.; Brabec, D. & Stefancic, I.: Influence of Train Control System Characteristic on Railway infrastructure Capacity
180 Charvatova, H.; Vasek, V.; Drga, R. & Krenek, J.: Software Application for Solving of Non-Stationary Temperature Fields in Two-Layer Plate
181 Cotet, C. E.; Popa, C. L.; Chiscop, F.; Parpala, L. F.; Dragoi, G. & Rosu, S. M.: Assemble-Disassemble Cell Material Flow Management
182 Matusu, R. & Prokop, R.: Control of Temperature in Laboratory Model of Hot-Air Tunnel
183 Matusu, R.: Matlab Toolboxes for Fractional Order Control: An Overview
184 Matusu, R.: Regions of Stability for PID Controllers
185 Bujdei, C. & Moraru, S. – A.: A Design for a Network End Node, Based on Arduino and XBee
186 Pasalodos, D. & Domingo, R.: A Maturity Model for Quality Management to Increase the Organizational Knowledge
187 Pasalodos, D. & Domingo, R.: A Maturity Model for Quality Management to Improve the Manufacturing Results
188 Domingo, R.; Garcia, M. & Sebastian, M. A.: Relationship Between Torques and Power Consumption in Dry Machining of Uns A92024-T3 Alloy
189 Vujasinovic, E.; Pusic, T.; Dragcevic, K. & Dragcevic, Z.: Sailcloth Sorption Properties as an Objective Indicator of Quality
190 Dragcevic, Z.; Kirin, S. & Saravanja, B.: A Method of Workplace Design for Sewing Operations
191 Harangus, D. & Duda – Daianu, D. C.: The Teamwork Abilities Versus Leadership
192 Pop, P. A.; Gordan, I. M. & Gordan, C. E.: Certain Applications of Frontal Gear Couplings
193 Zeqiri, H. M.; Salihu, A. H.; Bunjaku, A.; Osmani, H.; Qehaja, N. E. & Zeqiri, F.: Research of Chip Formation During the Processing with Turning
194 Macku, L.: Arrhenius Equation Parameters Identification from Temperature Profiles
195 Pasic, M.; Catovic, A.; Bijelonja, I. & Crnovrsanin, S.: Linear Programming Local Cost Nutrition Optimization Model
196 Mekjavic, I.: Structural Analysis of Concrete Spherical Shells
197 Stanciu, M. D.; Curtu, I.; Terciu, O. M.; Savin, A. & Cosereanu, C.: Evaluation of Acoustic Attenuation of Composite Wood Panel through Nondestructive Test
198 Dolinay, J.; Dostalek, P. & Vasek, V.: Graphical User Interface Simulators for Lessons of Real-Time Programming
199 Cvjetko, I.; Budic, I. & Novoselovic, D.: The Influence of Vacuum on the Occurrence of Porosity During Casting of Aluminum Alloys
200 Korbel, J. & Prokop, R.: Aperiodic Principle for Automatic Controller Tuning
201 Korbel, J.: Smith Predictor in Relay Autotuning
202 Popescu, D. & Parpala, R. C.: FEM Analysis of Pedicle Screw-Bone Interface for Different Insertion Directions
203 Simicevic, V.: Internet Sales Diffusion Determinants: Empirical Evidence From EU Countries
204 Grzan, M.; Covo, P. & Belak, B.: Radar Jamming Protection – Technical Solutions
205 Polansky, R.; Prosr, P. & Pinkerova, M.: Investigation of Encapsulant Material Used in Photovoltaic Modules by Thermal Analyses
206 Iltschev, V. I.: Parsing Table Structure and Algorithm for the LR(K) Parsing Method
207 Manas, D.; Stanek, M.; Manas, M.; Ovsik, M.; Pata, V. & Cerny, J.: Thermal Effects on Steels at Laser Cutting
208 Manas, D.; Stanek, M.; Manas, M.; Ovsik, M.; Pata, V. & Cerny, J.: Visualization of Tire Tread Behaviour at Wear Process
209 Begic, D.; Bijelonja, I.; Kulenovic, M. & Cekic, A.: Numerical Simulation of the Laser Beam Drilling Process
210 Tekic, Z.; Cosic, I. & Katalinic, B.: Innovation and Knowledge Creation Mechanisms
211 Fedoryshyn, R.; Zagraj, V. & Pistun, Y.: Automation and Optimization of Coal Grinding by Means of Ball Mills
212 Wessely, E.; Balczak, S.; Hrubina, K. & Macurova, A.: Manufacturing Optimization with the Use Workshop Manufacturing Process
213 Macura, D.: Graphical Interpretations Functions of Several Variables for Using in the Technological Experiments
214 Navratil, M. & Kresalek, V.: Measurement of Very Small Electrical Capacity Changes Using Bridge Method
215 Kozina, M.: Applying the CMMI Model in Software Process Improvement
216 Lancea, C.; Stamate, V. M.; Chicos, L. A. & Oancea, G. I.: CAD System for Modeling the Physiognomic Surface of the Side Group Teeth
217 Hofreiter, M.: Estimating Soil Heat Flux at Surface Soil Layer
218 Rotaru, V. H.; Voicu, A. R. & Kalapis, F.: The Implications of Managerial Accounting in Strategic Management
219 Samek, D.: Rotation Speed Control of Milling Machine
220 Dobrescu, T. G.; Opran, C.; Jiga, G. – G. & Georgescu, L. E.: Polishing of Silicon Wafers
221 Dobrescu, T. G.; Nicolescu, A. F.; Pascu, N. & Dobre, D.: Flattening of Silicon Wafers
222 Vosniakos, G. C. & Karyotis, M.: Structural Improvement of Hydraulic Shearing Machine
223 Vosniakos, G. C.; Vassiliou, A. & Tsekouras, S.: Numerical Simulation of Sand Casting of an Aluminium Part
224 Cekic, A.; Kulenovic, M. & Begic, D.: Quality of Machined Surface During CO2 Laser Cutting of Alloy Steels
225 Cetin, L.; Baser, O.; Keskin, O. & Uyar, E.: Vision Based Control Algorithm for a Mobile Manipulator
226 Dostalek, P.; Dolinay, J. & Vasek, V.: Utilization of Graphics Processing Unit in Sound Source Localization Based on Digital Beamforming
227 Topalova, I. C. & Tzokev, A.: Adaptive Marble Plate Classification System Based on Neural Network and PLC Implementation
228 Nikolic, G.; Cubric, G.; Gmaz, S. & Krajnovic, M.: Coordinate Multi-Valve
229 Pokorny, P. & Mahdalicek, P.: The Calculation Insolation of Houses
230 Danisova, N.; Sebenova, S. & Velisek, K.: Application of Sequence Diagram within Tool Change During Machining
231 Meciarova, J.: Expert System for Assessing Health Hazards of Metalworking Fluids
232 Matusova, M.; Hruskova, E. & Javorova, A.: Usage of Assembly and Intelligence in Flexible Assembly Cell
233 Jambor, J. & Majerik, J.: Improving the Processes of Auditing the Quality Management System
234 Majerik, J. & Jambor, J.: Prismatic Milling Simulation Process and CNC Programming in the CAD/CAM System CATIA V5R20
235 Dosedla, M. & Bradac, F.: Effective Machine Tool Costs Reduction Method
236 Momete, D. C.: Assessment of Sustainable Potential of Biomass
237 Cosoi, C. M.: Exploring the Role Played by Children and Tweens in Advertising Using Content Analysis
238 Alic, C. I.; Miklos, I. Z. & Miklos, C. C.: Finite Element Analysis of a Latch Plate as Component of the Seat Belt Buckle Assembly
239 Geonea, I. D.; Dumitru, N.; Ungureanu, C. A. & Catrina, G.: Design of a Transmission for a Electric Powered Wheelchair
240 Kravarikova, H.: Simulation Models and Applications
241 Opran, C. & Dobrescu, T. G.: Temperature Behaviour at Drilling Biocomposite Polymeric
242 Pekar, L. & Kureckova, E.: Comparison of Transfer Function Rational Approximations for LTI-TDS
243 Pekar, L.: Nyquist Criterion for Systems with Distributed Delays
244 Rusu – Casandra, A. L.; Iliescu, N. & Baciu, F.: Comparative Study of the Stress State in Plates Assembled with Screws
245 Rusu – Casandra, A. L.; Iliescu, N. & Baciu, F.: Numerical and Experimental Stress Analysis of a Crown-Molar System
246 Stremy, M. & Bezak, T.: Power Spectrum of the Combined Dynamic Systems
247 Hadziahmetovic, H. & Dzaferovic, E.: Mixing Technology in Hydraulic Transport
248 Kucerova, M. & Lestyanszka Skurkova, K.: Factual Approach to Decision Making in Companies Slovak Republik
249 Luca, R.; Simion, C.; Troester, F. & Gall, R. M.: Image Processing for Autonomous Parking Procedures
250 Mlkva, M.; Paulova, I. & Ruskova, D.: The Level of Leadership in the Application of Quality Management
251 Oanta, E.; Panait, C.; Marina, V.; Marina, V.; Lepadatu, L.; Constantinescu, E.; Barhalescu, M. L.; Sabau, A. & Dumitrache, C. L.: Mathematical Composite Models, a Path to Solve Research Complex Problems
252 Oanta, E.; Panait, C.; Batrinca, G. & Pescaru, A.: Computer Based Educational Model of the Bent Hull in the Context of the Maritime Education
253 Oanta, E.; Panait, C.; Batrinca, G. & Pescaru, A.: Basic Concepts to Design the Software Application of a Computer Based Mechanical Engineering Model
254 Saramet, O.; Toma Bianov, A. & Gabor, D. O.: Flexicurity – a Solution for Romanian Labour Crisis
255 Botezatu, N. A. & Stan, A.: Denial of Service Resistant MAC for Wireless Mesh Networks
256 Chwastyk, P. & Kolosowski, M.: Choice of Variant of Manufacturing Process with Estimation of Cost Production
257 Dumitru, N.; Baila, A.; Craciunoiu, N. & Malciu, R.: Dynamic Analysis of the Oil Rod Pumping System Mechanism
258 Katic, D.; Majstorovic, V. & Colak, I.: Performance Measurement Review
259 Kucerova, L.; Jirkova, H.; Jandova, D. & Masek, B.: Combined Effect of Deformation and Heat Treatment on Carbide Distribution in RSt37-2 Steel
260 Suciu, M. – C. & Neagu, A. – M.: Policies Regarding Equal Opportunities in Education
261 Ionescu, G.; Paltanea, G.; Paltanea, V.; Nemoianu, I. V. & Cazacu, E.: Elimination of High Order Harmonics from the Output Voltage of an Inverter Using a Special Configuration Device
262 Zovak, G.; Saric, Z. & Cop, A.: Conceptual Model for Structuring Traffic Accident Data
263 Srajer, V. & Kleinova, J.: Effective Manufacturing Layout as a Condition of Economy of Production
264 Cotoi, E.: The Conclusion of Electronic Contract
265 Szuhanek, C. A.; Cernescu, A.; Faur, N.; Jianu, R. D.; Fleser, T. & Muntean, E. A.: A Mathematical Study Regarding Forces Effects During Orthodontic Treatment
266 Batista Ponce, M.; Rondan, S.; Sebastian, M. A.; Gomez, A.; Mayuet, P. F. & Marcos, M.: Energy Lifecycle Management: a New Concept for Managing the Energy Efficiency in Manufacturing Processes
267 Hauserova, D.; Dlouhy, J.; Novy, Z. & Zrnik, J.: Accelerated Carbide Spheroidisation in 100Cr6 Steel
268 Ivan, A. – M.; Nicolescu, A. F.; Dobrescu, T. G. & Strajescu, E. R.: Development and Modeling of Robotic Manufacturing Cell for Experimental Purposes
269 Negrut, M. L. & Mihartescu, A. – A.: Comparative Study on Construction Public Investment Regulations in Romania and Germany
270 Karaulova, T.; Pribytkova, M.; Sahno, J. & Shevtshenko, E.: Design of Reliable Production Route System
271 Bulearca, M.; Serban, C. E.; Muscalu, M. – S.; Vasile, C. M. & Popescu, C.: Factors Affecting the Reserve Depletion Level
272 Bulearca, M.; Serban, C. E.; Muscalu, M. – S.; Vasile, C. M. & Popescu, C.: Models for Market Structure
273 Kvas, M.; Valach, S. & Cervinka, L.: External Sdram Memory in FPGA Based Design
274 Simionescu, M.: National Strategy for Research, Development and Innovation by 2013
275 Crisan, N.; Stoica, G.; Tudose, V. & Gheorghiu, H.: Friction Force Determination for a Unicompartimental Knee Prosthesis
276 Parausanu, I.; Petre, C.; Tudose, V. & Gheorghiu, H.: Dynamic Coefficients Due to the Angular Displacements of the Shaft
277 Molnar, C. O.; Arion, M. N.; Soproni, V. D. & Bandici, L.: Researches Concerning the Problem of Coupling Between the Electromagnetic and Thermal Fields from Microwave Installations
278 Palka, J. & Palka, J.: OCR Systems Based on Neural Network
279 Skula, D.: A Simulator of the Human Head Rotation
280 Miller, A.; Bures, M. & Simon, M.: Proactive Approach During Desing and Optimization of Production System
281 Miller, A.; Kudrna, J. & Simon, M.: Proposal for a Joint Production Planning in Network Organizations
282 Vela, I.; Tufoi, M.; Amariei, D.; Vela, D. & Ciorba, I.: Optimized Solution for the Withdrawal Plant of a Steel Vertical Continuous Casting Installations by Changing the Roller's Surface
283 Aryassov, G.; Barashkova, T.; Gornostajev, D. & Petritshenko, A.: Development of the Improved Method of Grids
284 Cristescu, S. – A.: High Level Design of a Semantic Search Engine
285 Balic, J.; Ficko, M.; Salihu, A. H. & Gjelaj, A.: Optimization of Cutting Tool Path Generation Using Genetic Algorithm
286 Januska, M.: Communication in Virtual Enterprise Paradigm
287 Malisa, V. & Komenda, T. V.: More Efficient Studying in Complex Studies Due to Elementary Control of Workload on an Example in the Degree Program Mechatronics/Robotics
288 Poliakov, A. M.; Kolesova, M. & Chepenyuk, O.: Adaptive Control of a Three-Linkmanipulator at End-Effector Movement on Optimal Trajectories
289 Radneantu, N.; Stan, E. R. & Gabroveanu, E.: Model for Accounting Information Valuation, Using Multiple Linear Regression
290 Andrei, D. R.; Gogonea, M. R. & Stan, E. R.: Analysis of the Territorial Concentration of Tourist Accommodation Made by Tourist Destinations from the Point of View of Sustainable Development of Romanian Tourism
291 Andrei, D. R.; Gogonea, M. R. & Stan, E. R.: The Concentration Level of Touristic Units in the Sustainable Development of Romanian Tourism
292 Svrcek, D.: Determination of Input Parameters for the Design of a Rotor of Wind-Mill Motor
293 Teich, T.; Szendrei, D.; Franke, S.; Leonhardt, S. & Schrader, M.: Improved Space Heating in Smart Residential Buildings by Applying Dynamic Hydraulic Balancing
294 Teich, T.; Szendrei, D.; Franke, S. & Leonhardt, S.: Demand-Controlled Air Ventilation Strategies and Heat Transfer in Building Automation
295 Popescu, C.; Varsami, A. E.; Hanzu – Pazara, R. & Acomi, N.: Port State Control as an Ideal System
296 Varsami, A. E.; Popescu, C.; Dumitrache, C. L.; Hanzu – Pazara, R.; Chircor, M. & Acomi, N.: The Influence of Grounding Events on Maritime Industry
297 Jenicek, S.; Jirkova, H.; Kucerova, L. & Masek, B.: The Behaviour of Low-Alloy High-Strength Steel After Different Types of Processing for Dynamic Load
298 Pakhaliuk, V. I.; Poliakov, A. M.; Desyatov, I. B.; Kalinin, M. I. & Stupko, M. G.: The Kinematic and Dynamic Performances of the Loading Mechanism of the Hip Joint Wear Simulator
299 Golemac, Z. & Loncar, I.: Main Structural Features of Croatian Banking
300 Torims, T.; Gerins, E.; Ratkus, A.; Zarins, M. & Brutans, V.: Shipboard Crankshaft Bearing In-Situ Repairs Utilizing Laser Build-Up Welding
301 Tirian, G. O.: Fuzzy System for Control of a CNC Cutting Machine
302 Horalek, R. & Hlava, J.: Comparison of Linear and Nonlinear Model Predictive Control of Benchmark Drum Boiler
303 Pinca – Bretotean, C. & Josan, A.: Determination of the Variable Temperature Fields in the Cylinder Head of a Spark Ignition Engine
304 Terciu, O. M.; Curtu, I.; Stanciu, M. D. & Cerbu, C.: Mechanical Properties of Composites Reinforced with Natural Fibre Fabrics
305 Pryanichnikov, V. E.; Andreev, V. P.; Ivchenko, V.; Kuvshinov, S. & Prysev, E. A.: Adaptive Environment for Developing and Programming of Mobile Robots
306 Seiler, S.; Ptasik, D. & Sell, R.: Remote and Virtual Labs in a Distance Learning Environment
307 Vilcans, J.; Torims, T.; Zarins, M. & Ratkus, A.: Experimental Analysis of the Rubber Pad Forming
308 Palka, P. & Pastuszkova, E.: Justification of Amts Using the Approach of Real Options
309 Votrubec, R.: Control of Active Sanitary Coach
310 Prskalo, M. & Colak, A.: Application of Finite Element Method in Pile Wall Modeling
311 Gastermann, B. C.; Stopper, M. & Katalinic, B.: Aspects of the Production Control System Conwip in Small and Medium Sized Industrial Companies
312 Kurtuhuz, A. M.; Radu, D. L.; Baciu, G.; Anghel, C.; Santi, A. E. & Popescu, A. P.: Family Violence and its Consequences in the Educational Process
313 Kurtuhuz, A. M.; Vasilescu, I.; Lupu, F.; Lupu, A. G.; Radu, D. L. & Kurtuhuz, M. C.: The Manager Role in Decision Making
314 Bortun, C. M. & Cernescu, A.: Multidisciplinary Evaluation of Complete Dentures Durability
315 Egri, A.; Sirb, V. C.; Patrascoiu, N. & Tomus, A.: Intelligent Control and Monitoring of Drinking Water Distribution System
316 Masek, B.; Hronek, P. & Stadler, C.: Analyses of Testing Stand for Radial Hydraulic Forging Machine
317 Kolarik, L.; Kovanda, K.; Valova, M.; Vondrous, P. & Dunovsky, J.: Hot Cracking T-Joint Weldability Test of Precipitation Hardenable Al Alloys
318 Valova, M. & Scuhanek, J.: Evaluation of Tribilogical Characteristics of Duplex Coated 31CrMoV9 Steel
319 Badea, M.; Moraru, S. – A. & Grigorescu, C. – M.: Automated Reserve Arming Control System for Power Supply
320 Belan, M. & Tarasovicova, A.: The Utilization Procedural Gaseous Medium in Machining of Steel1.4301 by Tools from HSS
321 Kukushkin, I. K.; Katalinic, B.; Cesarec, P. & Kettler, R.: Reconfiguration in Self-Organizing Systems
322 Zima, D.: The Use of Modern Teaching Aids in Biology Classes in Primary Schools of Pozega-Slavonia County
323 Anica – Popa, I. – F.: General Framework for Organizational Learning System
324 Anica – Popa, I. – F.: Food Traceability Systems and Risk Management
325 Negru Strauti, G.; Maistor, S. – I.; Mocan, M. L. & Pugna, A. P.: Regional Competitiveness Evaluation in Romania
326 Macris, M.; Man, M.; Boca Rakos, I. S. & Gadau, L.: The Process of Forming Human Capital Owing to Education
327 Todea, N.; Stanciu, I. C. & Udrea, A. – M.: Accounting Policies on Environmental Costs and their Calculation Method in the Entity
328 Cep, R.; Janasek, A. & Petru, J.: Tungaloy Ceramic Cutting Tools at Interrupted Machining
329 Boca, G. D.: Taguchi Method for Robust Design in Quality Management
330 Bechir, A.; Ghergic, D. L.; Bechir, E. S.; Smatrea, O.; Popescu, A. I. & Gioga, C.: Application of Polymeric Impak Material to Mitigate the Cranio-Mandibular Effects of Stress
331 Mitu, D. – E. & Memet, F. S.: Considerations on Adopting R 404A Instead of R22 on Reefers
332 Babik, Z. & Dostal, P.: Hammerstein and Wiener Models in Modeling of Nonlinear Process
333 Babik, Z. & Dostal, P.: The Hammerstein and Wiener Models in Nonlinear Process Control
334 Hubacek, J.; Bobal, V. & Brazdil, M.: Nonlinear Modeling of Laboratory Model AMIRA DR300 by Recurrent Neural Network
335 Palikova, K.: Creation Process of the Innovative Virtual Enterprise
336 Kurkin, O. & Bures, M.: Evaluation of Operational Times by MTM Methods in the Digital Factory Enviroment
337 Voicu, M. C.; Lammen, B. & Schmidt, R.: Active Vibrations Damping of Bending for Printing Roller
338 Babalova, E.; Taraba, B.; Behulova, M. & Spanielka, J.: Experimental Results for Laser Cutting of Stainless Steel Plate 5 mm in Thickness
339 Mihailescu, M. I.; Diaconescu, S. S. & Rusu, S. M.: Authentication Method Based on Holographic Signature Recognition System Using Physical Modelling of a Pen
340 Gerlich, V. & Zalesak, M.: Elementary Benchmark of Comsol Multiphysics: Analytical Model Verification
341 Gerlich, V.; Pisan, R. & Zalesak, M.: Benchmark of COMSOL Multiphysics Via In-Depth Floor Slab Test – Stationary Cases
342 Tiro, D. & Junuz, E.: Selection of the Best Software from Several Offered for a Particular Purpose
343 Dragolea, L. – L.; Achim, M. I. & Fleser, M.: Implementing of Quality Management in Banking Sector from Romania
344 Poroch – Seritan, M.; Gutt, S.; Gutt, G.; Severin, T. – L. & Stroe, S. – G.: Contributions to the Development of Materials and Energy Balances for the Electrodeposition of Ni-Fe Alloy at Different Technological Parameters
345 Stroe, S. – G.; Gutt, G.; Gutt, S.; Poroch – Seritan, M.; Severin, T. – L. & Maiorescu, M.: Research on Iron and Nickel Migration from Austenitic Stainless Steels Into Acid Food Products
346 Gutt, G.; Gutt, S.; Poroch – Seritan, M. & Gutt, A.: Complex Device for Water Analytic
347 Gutt, G.; Gutt, S.; Alexuc, F. – C.; Stroe, S. – G.; Mironeasa, S. & Gutt, A.: Contribution on Electromagnetic Shielding of Working and Living Spaces
348 Sirucek, M.; Paslavsky, B.; Trnka, P. & Pihera, J.: Partial Discharge Measurement in Imprefections of Oil-Paper Insulating Systems
349 Gutt, S.; Gutt, G.; Severin, T. – L.; Mironeasa, S.; Poroch – Seritan, M. & Alexuc, F. – C.: Equipment for Material Testing and Advanced Characterization
350 Gutt, S.; Gutt, G.; Severin, T. – L.; Poroch – Seritan, M.; Mironeasa, S. & Oroianu, M. A.: Portable Hardness Tester
351 Gutt, S.; Gutt, G.; Gutt, A.; Poroch – Seritan, M.; Mironeasa, S. & Rosu, A. I.: Portable Surface Plasmon Resonance Phenomenon (SPR)-Based Biosensors
352 Gutt, S.; Gutt, G.; Alexuc, F. – C.; Todirica, F. S.; Gutt, A. & Severin, T. – L.: Contribution Spectromectrical Analysis of Thermal Plasma
353 Severin, T. – L.; Gutt, S.; Gutt, G.; Poroch – Seritan, M. & Stroe, S. – G.: Martens Micro Indentantion Study of Ni Galvanic Deposition
354 Majer, Z.: Numerical Modeling of Micro-Crack Propagation in Composites
355 Novosad, D. & Macku, L.: Two-Degree-Of-Freedom Control of a Semi-Batch Reactor Process
356 Widmaier, T. V. E.; Pirttiniemi, J. T.; Kiviluoma, P. J.; Porkka, E. A. & Kuosmanen, P. O.: Ultrasonic Measurement Based Modelling of Chilled Cast Iron Thermo Roll
357 Nemcova, A.; Novotna, E.; Pacal, B. & Tulka, J.: Corrosion Resistance of Aluminium Alloy in the Aqueous Solution of Urea
358 Nestorovic, T. & Struhar, V.: Designing a Personal Assistance Application Using Wizard of Oz Methodology
359 Pavlas, L.: Remote Controlling Electronic Devices by Internet
360 Sostar, M. & Devcic, A.: Macroeconomic Effects of EU Funding on Regional Development
361 Misra, J. P.; Jain, P. K. & Dwivedi, D. K.: Parametric Optimization of ECH Process for Gear Finishing by RSM and SAA
362 Kacor, P.; Misak, S. & Prokop, L.: Modification of Construction Design of Vertical Axis Wind Turbine
363 Cechova, L. & Simon, M.: Risk Management in View of the Product Lifecycle
364 Drimus, A. M. & Bilberg, A.: High Resolution Flexible Tactile Sensors
365 Marinescu, D. A. & Nicolescu, A. F.: Calculus Applications for Determining the Total Elastic Displacements of P-Joints
366 Svaco, M.; Sekoranja, B. & Jerbic, B.: Multiagent Robotic Collaborative Framework
367 Kyas, K.; Stanek, M.; Manas, M.; Manas, D.; Navratil, J. & Senkerik, V.: Influence of Runner System Design on Molding Process
368 Kyas, K.; Stanek, M.; Manas, M.; Manas, D.; Cerny, J. & Skrobak, A.: Non-Contact Method of Part Surface Scanning
369 Kyas, K.; Stanek, M.; Manas, D.; Manas, M.; Ovsik, M.; Skrobak, A. & Krumal, M.: Thermal Effects on Steels at Flame Cutting
370 Kratochvil, P.; Machova, S. & Kleckova, J.: Spreading Activation Applied in Semantic Networks of Language Neural Processing Models
371 Piscan, I.; Janssens, T. & Predincea, N.: Experimental Validation of FEM for Frictional Contacts
372 Machova, S.; Kratochvil, P. & Kleckova, J.: The Quantum of Mind: Physics as complementary cognitive semantics knowledge
373 Shandilya, P. & Jain, P. K.: Effect of Machining Parameters on MRR During Wire Electric Discharge Cutting of SICP/6061 Al MMC
374 Rieciciarova, E. & Nanasi, T.: Static and Dynamic Characteristics of Asynchronous Motor
375 Rieciciarova, E. & Oravcova, J.: Experimental Assessment of Dynamic Efficiency of Spiroid Gears
376 Oravcova, J.; Javorova, A. & Rieciciarova, E.: Design of Active Parts in Clamping Mechanism
377 Gorner, T. & Simon, M.: Ergonomic Rationalization
378 Broum, T.; Kopecky, M. & Kleinova, J.: Enhancement of Stage-Gate Process by Value Analysis
379 Broum, T.; Dvorak, J. & Kleinova, J.: Value Optimization and Risks Elimination of Product
380 Petrescu, I.; Mohora, C. & Ispas, C.: Interlaminar Fracture Toughness Behavior for CFRP Unidirectional Laminates Using DCB Test
381 Tanase, A. C. & Tanase, F. D.: Aspects Regarding the Role of Higher Education and Professional Training in the Growth of Economic Competitiveness in Romania in the other European Union Countries
382 Tanase, A. C.; Dinu, G.; Tanase, F. D. & Dinu, L.: Implications of Prices and Incomes Upon the Resita Population's Consumption
383 Hajdu, S.: Optimization of Suction Grippers Placement for Manipulation with Thin Square Sheet Metal
384 Bjorklund, K.: Crisis Management and HR Management: Overview of Important Studies and Researches
385 Vicikova, J. & Markova, P.: Comparison of the Using of Crm in Enterprises in Slovakia and Hungary
386 Cirovic, I.; Simeonov, S.; Stano, P. & Pfaff, O.: Approaches for Solving Production Planning and Scheduling Problems Using Genetic Algorithms
387 Babescu, M.; Bota, C. & Caruntu, B.: Maximization of the Energy of a Wind System with a Synchronous Generator
388 Bota, C.; Caruntu, B. & Bota, C.: An Optimal Method for the Computation of an Approximate Solution of a Class of Differential Equations with Application in Economy
389 Sekulova, K. & Simon, M.: Risk of Musculoskeletal Disorders and Occupational Diseases
390 Sztruten Lefter, G. G.; Dridea Stanescu, C. R. & Murgoci, C. S.: Impact of the Economic Crisis Overt the Romanian Hotel Industry
391 Mudrikova, A.; Kostal, P.; Delgado Sobrino, D. R. & Vlasek, M.: Laboratory of Production System Control and Progressive Education Methods
392 Duchek, M.; Tikal, F. & Bozik, M.: Optimization of Heat Treatment of Castings
393 Hernaus, T. & Kolar, N.: Differences in Job Characteristics Between Line and Staff Po-sitions
394 Urbanek, M.; Hronek, P. & Masek, B.: Nail Element as a Joining Feature Between High-Strength Tube and Sleeve
395 Secareanu, C.; Andrei, D. R. & Dridea Stanescu, C. R.: Modeling Synchronous and Asyncrhronous Correlations through Statistical Methods in Romanian Tourism
396 Malanik, D. & Jasek, R.: Multidimensional User Authentication
397 Motyl, I.; Jasek, R. & Palka, J.: Secure User Authentication to the Information System Using the Methods of Fractal Geometry
398 Dvorak, J. & Krotak, S.: Determination of Key Drivers Regarding to Costs of Technical Products
399 Halas, O.; Benes, L. & Minar, L.: Sawdust as a Filler to Alkali-Activated Fly-Ash:
400 Podrug, N.: A Critique of Anti-Management Theories' Dominance
401 Brazdil, M.: Nonlinear Plant Identification Using Hammerstein Model
402 Fialka, J. & Uher, M.: Effect of Temperature Increasing to Curie Point on the Material Coefficients of PZT Ceramics
403 Katic, M.; Simunovic, V. & Barsic, G.: Modification of a Zeiss Gauge Block Interferometer
404 Filipovic, D.; Sapunar, I. & Sapunar, G.: Overview of Crucial Variables for M&A Success
405 Otahal, J. & Hruska, F.: Dynamic Identification of Circuit with Linear Optocoupler IL300
406 Otahal, J.; Brazdil, M. & Hruska, F.: Overvoltage Limit Limiter and Linear Galvanic Separation Circuit Identification and Simulation
407 Otahal, J. & Hruska, F.: Possible Protections of Embeded Systems Inputs
408 Otahal, J. & Hruska, F.: The Reasons for Use and Description of the Circuit with Linear Optocoupler IL300
409 Hlavaty, I.: Solderabilty of High-Purity Aluminium with the Lead-Free Solders
410 Boudna, H. & Jasek, R.: Visual Aid to DE configuration for Kakuro Puzzle Solving
411 Achsan, H. T. Y.: Web Mining Based on User Profile and Preferences
412 Zoroja, J.: Differences in Level of Education of Internet Users in European Developed and European Post-Communist Countries
413 Mulliqi, I. S.; Terziqi, A. K.; Bajraktari, B. V. & Mehush Rifat, A.: Impact of Combustion Time of Lignite in the Model of Kinetic Combustion in the Boiler of "Kosovo B"
414 Sivriu Doinea, G.; Bejan, R.; Mitu, D. & Bocanete, P.: Specific Facilities Plans for Ships Tanker
415 Popa, G. D.: Heterogeneous Database Integration Using Hibernate Mapping Files
416 Trifan, I.: Plagiarism Detection in a Multilingual Environment
417 Turna, M.; Sahul, M.; Ondruska, J. & Lokaj, J.: Electron Beam Welding of Copper to Stainless Steel
418 Turna, M.; Ondruska, J.; Sahul, M. & Turnova, Z.: Proposal of Welding Technology for Trimetal Production
419 Mich – Vancea, C.; Leuca, T. & Nagy, S.: Uniform Induction Heating Solutions Determined by Numerical Simulation
420 Negricea, C. I.; Edu, T. M. & Ivanescu, I. M.: The Online Environment- a Viable Entrepreneurship Solution for the Romanian Economics Students- a Marketing Research
421 Barsic, G.; Simunovic, V. & Katic, M.: Ensuring Measurement Unity in the Field of Dimensional Nanometrology
422 Necesal, L.; Lukas, L. & Jasek, R.: Measures for Critical Infrastructure Protection in the Czech Republik
423 Necesal, L. & Lukas, L.: Critical in frastructure Warning Information Network
424 Vesely, I.; Sir, M. & Zamecnik, D.: Quadrature Inductance Identification Using the Improve Frequency Analysis
425 Cip, P. & Horak, K.: Concept for Optical Mark Processing
426 Rak, J.; Jasek, R.; Adamek, M. & Jurikova, L.: The Fundamental Aspects of Information Support for Population Protection From the Perspective of Municipalities with Extended Powers in the Czech Republic
427 Tent, I. D.; Dumitrescu, C. D.; Dumitrescu, E. C. I.; Trandafir, N. & Irimie, S. I.: The Aspects About Economic Analysis and Measure for Restructure a Company
428 Andrs, O. & Kovar, J.: Design of Scan Machine for Image Cataloging
429 Avram, G. – C.; Nicolescu, A. F.; Strajescu, E. R. & Petre, M.: Structural and Functional Optimization of Industrial Robot's NC Axes
430 Dobias, M. & Pivonka, P.: Algorithms for Practical Laboratory Models
431 Dokoupil, J.; Burlak, V. & Pivonka, P.: A Levenberg-Marquardt Method for Nonlinear Model Predictive Control Design
432 Peronja, I.; Veza, I. & Krolo Crvelin, A.: Model for Improving the Process Approach to Achieve Strategic Goals in Insurance Companies: the Croatian Case
433 Torok – Oance, M. F.; Ardelean, F. – M.; Voiculescu, M.; Urdea, P. & Onaca, A. L.: Object-Based Terrain Classification as Tool for Improving the Quality of the Digital Geomorphological Maps: a Case Study in Retezat – Godeanu Range (Southern Carpathians)
434 Trifan, A. L.: Financial Time Series Forecasting Using Neuro Fuzzy Approach for the Bucharest Stock Exchange
435 Vesely, I. & Zamecnik, D.: Influence of Horizon Length of Model Predictive Control with Quadratic Criterium
436 Tangjitsitcharoen, S. & Rungruang, C.: Intelligent Monitoring and Statistical Process Control of Surface Roughness on CNC Turning Process
437 Tangjitsitcharoen, S. & Rungruang, C.: In-Process Monitoring of Cutting States on CNC Turning Using Sensor Fusion Via Neural Network
438 Larchikov, I. A.; Stazhkov, S.; Mikhaylov, M.; Yurov, A. V. & Cvetkov, V.: The Study of Hydro Mechanical Processes in Hydro Machines of Power-Intensive Drives
439 Nastase, A. R.: Romanian Insurance Market Supervision
440 Cervinka, L. & Kvas, M.: Device for Calculate of Swabs
441 Florian, T.; Burian, F. & Zalud, L.: Control Unit for Humanoid Robot
442 Dumitrache, R.; Dumitrache, C. L. & Chircor, M.: Mechanisms of Energy Absorption and Yielding of Composite Structures
443 Onaca, A. L.; Urdea, P.; Torok – Oance, M. F. & Ardelean, F. – M.: Electrical Resistivity Measurements in Sensitive Periglacial Environment from Southern Carpathians (Romania)
444 Dumitrache, C. L.; Dumitrache, R.; Chircor, M. & Varsami, A. E.: Analysis of Structural Damages in Ship Collisions Based on Simplified Method
445 Seckar, J. & Pokorny, P.: Application of Cellular Automata in 3D Environment Using MAXscript
446 Lut, D. M.: Vocational Training for Managers in Companies from Romanian Western Region
447 Lut, D. M. & Miculescu, M. N.: Mind Lab Educational Program an Excellent Tool for Managerial Skills Development
448 Huzlik, R. & Vetiska, V.: Simulation of Mers Circuit as Physical Model with Simscape
449 Iovanas, R.; Trif, I. N.; Iovanas, D.; Binchiciu, E.& Dragan, A. M.: Elaboration of Special Tubular Rods Typed Filler Materials with Composite Core
450 Bocanete, P. & Dragomir, M. C.: Improving Quay Cranes Exploitation in Container Terminals
451 Brandas, C.: A Taxonomy of Support Systems for Corporate Governance
452 Brandas, C. & Ocnean, M.: Study on Corporate Governance System Architecture
453 Mereuta, V. L.; Alexandru, P. & Palaghian, L.: Microhardness a Possible Characteristic of Fatigue Damage of Metallic Surfaces
454 Sulovska, K. & Kovac, P.: Research on Face Recognition Systems in Term of their Reliability and Credibility
455 Sulovska, K.: Analyzing the Image of the Face
456 Sulovska, K. & Neckar, P.: Evaluating the Approaches to the Basic Face Recognition Software
457 Anica – Popa, L. – E.: OMCCAAF Conceptualizing AF Taxonomy and Thesaurus Construction
458 Anica – Popa, L. – E.: OMCCAAF: Articulating Organizational Memory and Business Intelligence
459 Pracek, S.; Sluga, F.; Mozina, K. & Franken, G.: Unwinding from Cylindrical Packages
460 Pracek, S.; Sluga, F.; Mozina, K. & Franken, G.: Cylindrical Packages Simulations
461 Pracek, S.; Sluga, F.; Mozina, K. & Franken, G.: Conic Packages Oscillations
462 Bocaniala, T.; Rusu, I.; Coman, V. L.; Pocora, M. & Savenco, I. G.: The Use of Computer Technology in Preventing and Fighting Crime
463 Murarescu, M.; Dima, D.; Andrei, G. & Circiumaru, A.: Influence of Mwcnt Dispersion on Electric Properties of Nanocomposites with Polyester Matrix
464 Zemann, R.; Bleicher, F.; Puschitz, F.; Zisser – Pfeifer, R. & Habersohn, C.: Electrochemical Micromachining of Tungsten
465 Filip, F. – C. & Shirvani, H.: Notional Decision Analysis and Resolution on Production Management Systems
466 Pocora, M.; Mironov Duret, G. N.; Necsulescu, E.; Pusca, F.; Duret, N. & Goga, G. L.: E-Government – the Case of Romania
467 Vucijak, B. & Ceric, A.: Multicrtieria Prioritization of Wastewater Projects on Example of Bihac Municipality
468 Laptoiu, D. C.; Antoniac, I. & Cotrut, C.: Optimisation of Magnets Positions on the Knee Joint Using Comsol Multiphysics
469 Laptoiu, D. C.; Antoniac, I. & Antoniac, A.: Testing the Effect of Permanent Magnets on Magnetic Nanoparticles Ferrofluid – Targeted Delivery Inside Knee Articulation
470 Lupu, A. G. & Lupu, F.: The Competitive Advantage in Negotiation
471 Miculescu, M. N.; Lut, D. M. & Miculescu, C.: Current Trends of Production Cost Accounting
472 Dragota, I. – M. & Stancu, M.: Corporate Governance and Managerial Performance in the Financial Sector: a Proposal for a New Method of Scoring
473 Caruntu, G.; Panait, C. & Dumitrascu, A.: On the Noise of Magnetic Microsensors in Bipolar Technology
474 Caruntu, G.; Tamas, R. & Dragomirescu, O.: A New Approach on the Offset of Magnetic Microsensors
475 Hoesel, D.; Wertheim, R.; Haenel, T. & Thurner, S.: Milling of Cast Material and PTA-Hard-Facing Layers of the Cobalt-Base-Alloy Stellite 12
476 Vallisova, L. & Dvorakova, L.: Development and Evaluation of Accounting Harmonization Processes in the Czech Republic with International Accounting Standards/International Financial Reporting Standards
477 Kokla, M.: An Integrated Approach for Developing a Concept for a Manufacturing Execution Model
478 Kokla, M.: Case Study Regarding Effectiveness and Profitability of Automating the Welding Process
479 Mraz, P.; Mentlik, V. & Pihera, J.: Partial Discharge Activity of Thermally Aged Stator Winding Bars
480 Goyal, K. K.; Jain, P. K. & Jain, M.: A Novel Approach to Measure Machine Reconfigurability in Reconfigurable Manufacturing System
481 Dumitrache, A. – A.; Boroi, A.; Pusca, F.; Pocora, M. & Chirila, A. D.: Recent Tehnological Tendencies of Money Laundering
482 Doncuk, J. & Mentlik, V.: Diagnostic System for Fire Resistance Cables
483 Pusca, F.; Boroi, A.; Dumitrache, A. – A.; Pocora, M. & Chirila, A. D.: General Aspects on the Influence of the Modern Bio-Medical Techniques on the Human Body
484 Rosu, A.; Gavrila, S. & Cristea, S. L.: Export Credit Insurance, Another Form of State Aid?
485 Duranik, T.; Stopper, M. & Ruzbarsky, J.: Applying Value Stream Mapping to Identify Hidden Reserves and Avoid Bottlenecks
486 Socol, A.: Loan Management Accounting in Romanian Banks
487 Hofmann, R.; Totzauer, S.; Haenel, T. & Wertheim, R.: Optimization of Value Added Chain in Manufacturing Using Step
488 Pinkerova, M. & Polansky, R.: Influence of Cross-Linking on Properties of Peva Used for Cable Sheaths
489 Mironov Duret, G. N.; Pocora, M.; Goga, G. L.; Necsulescu, E.; Duret, N. & Pocora, M. – S.: Values of the European Citizenship Under the Legal Membership or Quality
490 Iuga, I. C.: Bank Loan Quality Analysis
491 Iuga, I. C. & Socol, A.: Characteristics of Managing Operational Banking Risk
492 Buculei, A.; Poroch – Seritan, M.; Psibilschi, A. – M. & Rebenciuc, I.: Research Concerning the Evolution of Heavy Metals Content in the Fresh and Metal Can Preserved Vegetables (Tomatoes)
493 Tureac, C.; Pusca, A.; Pusca, F. & Filip, A. C.: Reporting and Registration the Accountancy of the Fee on Added Value
494 Sandu, L.; Topala, F. I. & Porojan, S.: Investigation of Stresses in Teeth Prepared with Different Tapers and Restored with Cast Crowns
495 Sandu, L.; Topala, F. I. & Porojan, S.: Finite Element Evaluation of Cast Metal Crowns Margin Geometry
496 Porojan, S.; Sandu, L. & Topala, F. I.: Visual Inspection of Laser Welded Ni-Cr Dental Alloys
497 Cenar, I.: Heritage Assets in the Accounting of Public Institutions
498 Rebenciuc, I.; Albu, E.; Poroch – Seritan, M. & Buculei, A.: A Study Regarding the Characteristics of the Flexible Plastic Materials Used for Bread Packaging
499 Savenco, I. G.; Lupsan, G.; Bocaniala, T.; Maftei, J.; Coman, V. L. & Gisca, C.: The Implementation of E-Government Concept in Romania
500 Petru, J.; Cep, R.; Grepl, M. & Petrkovska, L.: Effect of High Feed Milling on the Microstructure and Microhardness of Surface Layer
501 Fekete, H.: Building Performance in a Strategic Way
502 Dabija, A.; Constantinescu Pop, C. G.; Buculei, A. & Rebenciuc, I.: Study on Evaluating Antioxidant Capacity and Biologically Active Compounds from Basil
503 Hosovsky, A. & Havran, M.: Hill'S Muscle Model-Based Modeling of Pneumatic Artificial Muscle
504 Necsulescu, E.; Pocora, M. – S.; Necsulescu, M. – D.; Mironov Duret, G. N.; Duret, N. & Oncioiu, I.: The Importance of the Management of Consulting Companies, Concerning the Commercial Society During the Economical Crisis
505 Chachula, M.; Kolenak, R. & Kolenakova, M.: Interaction of BiAg11 Solder with Cu, Ag and Ni Substrates
506 Kolenak, R. & Chachula, M.: Soldering High-Purity Materials with Cu Substrate
507 Baser, O.; Keskin, O.; Cetin, L. & Uyar, E.: Computing the Torque Demand of a Prosthetic Leg
508 Keskin, O.; Cetin, L.; Baser, O. & Uyar, E.: Multi Robot Path Planning Framework
509 Nascak, L. & Koleda, P.: Circular Interpolation for Circular Trajectory
510 Provaznik, M.; Kolenak, R. & Martinkovic, M.: Damage Mechanism Analysis of Device for the Wave Soldering
511 Augustin, R.; Kolenak, R.; Neradova, M.; Kolenakova, M.; Chachula, M. & Provaznik, M.: Wettability of High-Temperature Brazing Alloys on RBSiC Ceramics
512 Upadhyay, V.; Jain, P. K. & Mehta, N. K.: Modeling and Experimental Study of Tangential Cutting Force in Dry Turning of Ti-6Al-4V Alloy
513 Neradova, M.; Kovacocy, P.; Augustin, R. & Kolenak, R.: Laser Beam Welding of Aluminium
514 Codina, G. – G.; Gutt, S.; Gutt, G. & Mironeasa, S.: Alveograph as a Rheological Tool to Predict the Quality Characteristics of Wheat Flour
515 Bestvinova, V.; Campbell, J.; Homokyova, M. & Horvathova, M.: Financial Management of Small and Medium Sized Enterprises in Slovakia During Financial Crisis
516 Oroian, M. A.; Gutt, S. & Gutt, G.: Influence of Hydrocolloids on the Rheological Behavior of Blueberries Yogurt
517 Gyorgy, A. & Gyorgy, A. C.: Principal-Agent Relations Between Local Authorities and Public Service Providers in Romania
518 Danescu, T.; Prozan, M. & Danescu, A. C.: Connecting the Fiscal Result to the Accounting Result of Economic Entities in Romania
519 Danescu, T. & Ducu, C. – M.: Pillars in Financial and Accounting Risk Management
520 Petrkovska, L.; Hribnak, D.; Petru, J. & Cepova, L.: Effect of Increasing Feed Speed on the Machined Surface Integrity
521 Dumitrescu, A.: New Researches Regarding Relationship Between Elementary Geometric Shapes and Basic Colours
522 Pira, B.; Bajraktari, A.; Cunaku, I. & Ymeri, M.: Synthesis of Mechanisms with More Than Four Bars Using Burmester Theory
523 Vucina, D.; Pehnec, I. & Gazibaric, D.: Reverse Engineering of Musical Instrument by Combining Stereo Imaging, 3D Reconstruction, CAD Primitives and Parametrization
524 Ardelean, L. C.; Reclaru, L.; Bortun, C. M. & Rusu, L. C.: Assessment Methods of Different Laser Welded Dental Alloys
525 Novak – Marcincin, J.; Barna, J.; Novakova – Marcincinova, L. & Fecova, V.: Principles of Product Assembly Visualization by Augmented Reality Usage
526 Novak – Marcincin, J.; Janak, M.; Kocisko, M. & Barna, J.: Increasing of Part Cutting Surface Quality by Tool Path Optimization
527 Orlic Protega, A.; Rogic, K. & Vrdoljak, J.: Logistic Approaches to Port Management System
528 Janda, Z.; Fulemova, J. & Rehor, J.: Machining of Ferritic-Martensitic Steel in Power Industry
529 Duse, D. – M. & Pasa, A.: Dental Implant-Abutment Connection Topology – Fea Investigations
530 Duse, D. – M. & Pasa, A.: Dental Implants Mechanical Properties: FEA vs. Physical Testing
531 Dulucheanu, C.; Severin, T. – L. & Bancescu, N.: The Influence of Intercritic Quenching in Ultrasonic Field on the Mechanical Properties of a Dual-Phase Steel Determined by Universal Hardness Test
532 Vouk, R.; Guszak, I. & Sisek, B.: The Role of Self-Service Technologies in Croatian Grocery Retailing
533 Pirjan, A.: Optimization Techniques for Data Sorting Algorithms
534 Orlovsky, I.; Zajac, J.; Monka, P.; Michalik, P. & Simkulet, V.: Mathematical Modelling of the Spray Drying Technological Process
535 Pivarciova, E. & Cernecky, J.: Wood Texture Influence on Temperature Fields
536 Navratil, P. & Balate, J.: "Non-Linear Mathematical Model of a Heat Source with Combined Production of Heat and Electric Energy"
537 Lippert, R. & Nyerki, E.: The Role of Soft Factors on the Successful Cooperation of Clusters
538 Oana, C. V. & Staiculescu, S. L.: Nature Conservation Strategy through a Spatial Data Infrastructure
539 Bancescu, N.; Dulucheanu, C. & Severin, T. – L.: Residual Stresses and the Ultrasonic Quenching
540 Suriansky, J. & Kocur, V.: Possibilities of Replacement of Absorption Cooling Unit by System of Peltier Modules in Process Optimization of Trigeneration System Control
541 Heinloo, M. & Aan, A.: On Creative Teaching of Engineering Mechanics
542 Dado, M.; Hnilica, R.; Kovac, J. & Kucera, M.: Assessment of Hand-Transmitted Vibration During Work with Chain Saw
543 Chatrnuchova, L.; Ondruskova, O. & Sablik, J.: Complex Evaluation of Investment Efficiency
544 Chatrnuchova, L.; Markova, P.; Prajova, V. & Sablik, J.: Innovation in Industry in Slovak Republic
545 Straka, L.; Rimar, M.; Corny, I. & Mihalcova, J.: Increasing of Operational Reliability of Technical System
546 Fenollera, M. & Lorenzo, J.: Effect of Risk Management Implementation on Productivity Improvement
547 Fenollera, M. & Goicoechea, I.: E- Learning Applied to the University Education in Engineering
548 Dejica – Cartis, D. & Dejica – Cartis, A.: Using Frame Analysis for Developing Foreign Language Competence in Engineering Students
549 Kuzmanovic, S. B. & Rackov, M. J.: Service Life of Universal Gear Reducers
550 Donat, M.: Unbalanced Magnetic Pull and its Effect on Dynamic Behavior of the Rotor with Nonlinear Anisotropic Support
551 Donat, M. & Navratil, P.: The Influence of Magnetic Pull on the Natural Frequency of the Rotor of the Generator
552 Simkulet, V.; Hatala, M.; Orlovsky, I.; Zajac, J.; Monka, P. & Michalik, P.: Microhardness Evaluation of Steel EN S233J2G3 in Heat Affected Zone After Plasma ARC Cutting
553 Moric Milovanovic, B.; Sisek, B. & Kolakovic, M.: Just in Time Concept as a Mean for Achieving Competitive Advantage in the Virtual Economy
554 Battista, C.; Dello Stritto, G.; Giordano, F.; Iannone, R. & Schiraldi, M. M.: Manufacturing Systems Modelling and Simulation Software Design: a Reference Model
555 Chiru, I. C. & Chiru, L.: Enhancing the Business Potential of Functional Foods through Traditional Gastronomy
556 Gheorghe, I. G.; Ciobota, N. – D. & Pacioga, A.: Creation of 3D-Cad Virtual Model for Rapid Prototyping Microtechnologies Using Selective Laser Sintering
557 Zidek, K. & Seminsky, J.: Automated Rehabilitation Device Based on Artificial Muscles
558 Mrazova, M.; Stancekova, D. & Semcer, J.: Comparasion of Machinability of Biocompatible Materials Used in Medicine for Dental Implants
559 Puia, R. S.; Marinas, V. C.; Zdorovetchi, C. A. & Agoston, S.: Analysis of the Influence of Some External Variables on Employees' Job Satisfaction
560 Kostelac, D.; Matrljan, D. & Dobovicek, S.: Relationship Between Processes and Project Management
561 Radu, C. & Popescu, D.: Strategic and Tactical Movements and Organizations' Competitiveness
562 Popescu, D. & Radu, C.: Strategies to Increase the Competitiveness of Industrial Products in the Context of the Global Economic Crisis
563 Caramidaru, V. D.; Vela, I.; Tufoi, M. & Gruescu, C. A.: The Influence of the Number of Teflon-Coated Layers Over the Vibrations and Noises to Gear Units with Wheel Cylindrical Gears
564 Zelinschi, G. A.: Strengthening of the Romanian Financing Capacity in Case of Natural Disasters
565 Zelinschi, G. A.: The Fiscal Impact of the Direct Losses Caused by a Future Earthquake to the Public Buildings in Romania
566 Novak, I.: Possibilities of Data Exchange Between Models of Production Systems
567 Bacek, T.; Majetic, D.; Brezak, D. & Kasac, J.: Analysis of Iterative Learning Algorithms for the Multilayer Perceptron Neural Network
568 Sebestyen – Pal, A.; Sebestyen – Pal, G. & Bulgaru, M.: Pro-Inova Platform for Patent Processing
569 Rokyta, L.: Testing of Grinding Wheels for Tools Manufacturing
570 Popescu, A. – I.: Transforming Learning for Lifelong Learning in the Knowledge Economy
571 Bekker, A. T.; Rusakov, D. S. & Sabodash, O. A.: Application of Simulation Methods for Estimation of Reliability of Underwater Pipeline Tracks in Frozen Seas
572 Winkelhoeferova, M. & Tupa, J.: Modelling of Diagnostic and Technological Processes
573 Kovacs, L. & Kovacs, A.: Aligator: Experiments and Limitations
574 Kovacs, A. & Kovacs, L.: Analyzing the Fluid Motion through Network Profiles Using the Boundary Element Method
575 Jinescu, V.; Sima, T.; Chelu, A. & Jinescu, C.: The Preloading Effects on Fatigue Strength and Fatigue Life
576 Leuca, T.; Nagy, S.; Mich – Vancea, C. & Nagy, A.: The Superficial Hardening of Inner Cilindrical Surfaces
577 Roslyakov, P. V.; Pleshanov, K. A. & Ionkin, I. L.: Fuel Combustion with Monitored Moderate Underburning
578 Nagy, S.; Leuca, T.; Mich – Vancea, C. & Nagy, A.: Algorithm for Simulation of the Coupled Electromagnetic and Thermal Phenomena
579 Bilek, O. & Rokyta, L.: Rapid Prototyping in Casting Technology: Case Study
580 Nascak, L. & Koleda, P.: Creating of 3D Picture in Matlab
581 Talnagiova, V. & Cerna, L.: Measurement of Assets in Financial Statements of an Industrial Company
582 Baier, O. & Witt, G.: Electroplating of AM Wax Models for the Production of Internal Structures
583 Merdanovic, E.; Lanc, D. & Turkalj, G.: Numerical Creep Buckling Analysis of Thin-Walled Steel Frame
584 Pintea, F. A.; Lacrama, L. D. & Gui, V.: Automatic Evaluation of Psychological Quiz Tests
585 Egorova, O.: Environmental Safety Management in the Context of Innovative Development of Enterprises
586 Panait, C.; Caruntu, G. & Dumitrascu, A.: On the Detection Limit of the Lateral Bipolar Magnetotransistors
587 Panait, C.; Dragomirescu, O. & Caruntu, G.: A New Efficient Implementation of Redundancy in Electronic Systems
588 Priss, J. & Klevtsov, I.: Strength Calculations of Slurry Disposal Pipeline
589 Bolos, A.; Bortun, C. M.; Bolos, O. – C. & Cernescu, A.: Investigation of Lung Function Among Dental Laboratory Technicians
590 Vince, T. & Molnar, J.: Remote Measurements of Variable Topology System
591 Fernandez Valdivielso, A.; Rodriguez, A.; Urbikain, G. & Lopez De Lacalle, L. N.: Roller Burnishing Application for Turned Parts Made of Austempered Ductil Iron
592 Popirlan, C. I. & Stefanescu, C. A.: A Multi-Agent Solution for Contact Centers Improvement
593 Hoble, D. A.; Stasac, C. O.; Bandici, L. & Molnar, C. O.: Modeling Inductive Heating Process of a Cylindrical Structure Mode of Two Different Materials at a Frecquency of 1000Hz
594 Ovsik, M.; Manas, D.; Stanek, M.; Manas, M.; Cerny, J.; Bednarik, M. & Mizera, A.: Microhardness of Modified Thermoplastics
595 Josan, A.; Pinca – Bretotean, C. & Ratiu, S. A.: The Effect of Thermal Tension on Quality Mill Rolls
596 Kovarikova, I.; Simekova, B.; Hodulova, E. & Ulrich, K.: Formation of IMC the Interface of SnAgCu1,0Bi Solder with Cu Substrate
597 Kovarikova, I.; Simekova, B.; Hodulova, E. & Ulrich, K.: Properties of Composite Wear Resistant Layers Created by Laser Beam
598 Serban, R. & Calin, O. A.: Production Planning Strategies Using a Data Base Integrate System
599 Knezevic, B.: Usage of Simulation in Inventory Management Education
600 Dumicic, K. & Zmuk, B.: Monitoring Delivery Time with Control Charts
601 Gasovic, M.: Effects of the Implementation of Product Category Management in Large Retail Companies
602 Madissoo, M. & Olt, J.: Dynamic Modeling of the Cutting Process
603 Babinec, T. & Richter, M.: Environment for 3D Computing
604 Glogar, M. I.; Parac – Osterman, D.; Grundler, D. & Rolich, T.: The Rule-Based Approach in Studying the Influence of a Different Textile Surfaces on Colour Similarity
605 Hugenschmidt, S. & Hofacker, W. C.: Numerical Simulation of the Convective Drying of Apple Slices
606 Konovalova, O.: Investigation of Influence of Reinforcement
607 Pivnickova, L.; Vasek, V. & Dolinay, V.: Numerical Methods of the Examination of the Postural Stability
608 Hodzic, A.; Dzanic, A. & Nezirevic, E.: Optimization of Drying Process Planks Beech by Artificial Way
609 Horejsi, P.; Horejsi, J.; Latif, M. & Ulrych, Z.: Automatic Generator of Lift Dispatcher System Model
610 Bilova, M.; Lumnitzer, E.; Badida, M. & Kralikova, R.: Analysis of Acoustical Properties of Mono and Multilayer Sound Absorbers
611 Teich, T.; Roessler, F.; Szendrei, D.; Franke, S. & Leonhardt, S.: Developing a Time Based Electricity Tariff
612 Teich, T.; Roessler, F.; Szendrei, D. & Franke, S.: Neural Networks for Smart Homes and Energy-Efficiency
613 Muminovic, A.; Saric, I. & Repcic, N.: Software for Deformity and Stress Condition of 2D Truss Beams Analysis
614 Badida, M.; Herczner, P.; Konkoly, J. & Lumnitzer, E.: Formalization of a Methodology for Measuring of the Noise from Small Sports Airports
615 Nakatova, H.; Hricova, B. & Badida, M.: Use of Ergonomics in Design Selected Department Workspace in Engineering Company
616 Martinka, J.; Chrebet, T. & Balog, K.: Impact of Oxygen Concentration on Ignition Time of Birchwood
617 Franko, S.; Babusova, E. & Badida, M.: Thermography and Possibilities of its Application in Practice
618 Calleja, A.; Fernandez Valdivielso, A.; Lopez De Lacalle, L. N. & Fernandez, J. T.: Virtual Simulation of Turn-Milling Operations in Multitasking Machines
619 Turekova, I.; Balog, K. & Rusko, M.: Fire Fighting Foams and the Environment
620 Bajic, D.; Celent, L. & Jozic, S.: Reverse Engineering Application in Preservation of Cultural Heritage
621 Silhavy, R.; Silhavy, P. & Prokopova, Z.: Use Case Points Method in System Engineering Project Estimation
622 Medgyesi, T.; Popescu, M. & Opris, C.: Difficulties Encountered in Performing Dissimilar Joints on Sheets
623 Stano, P.; Simeonov, S.; Cirovic, I. & Pfaff, O.: Application Range of Integrating Manufacturing Execution System Functions in Enterprises
624 Pfaff, O.; Simeonov, S.; Cirovic, I. & Stano, P.: Application of Finray Effect Approach for Production Process Automation
625 Skalova, P.: Population Growth and Human Resources Management
626 Balara, M.: The Linearised Control System of the Pneumatic Actuator
627 Burlak, V.; Pivonka, P. & Dokoupil, J.: Sensitivity Analysis for LQ Controller in the Position and the Incremental Form
628 Todica, G.; Garai, M. & Arghir, M.: Theoretical and Experimental Research for Dense Concrete as a Sound Absorbing Material
629 Lumei, C. V.; Arghir, M. & Garai, M.: Sound Absorption of Multilayered Samples Composed by Different Porous Materials and Perforated Facing
630 Jinga, V.; Oros, R. – G.; Samoila, C. & Ursutiu, D.: Mathematic Model of Heat Transfer in the Impulse Sensor
631 Ausperger, A.: Simulation of Deformation and Compression of Fabric During the Back Injection Moulding Process
632 Stankovsky, P. & Cibulka, V.: Present Situation of Integrated Logistics in Slovak Automotive Industry
633 Moisa, R.; Popescu, M. & Opris, C.: Problems Raised by Noxes Control at FCAW
634 De Sabata, A.; Matekovits, L.; Rohde, U. L. & Silaghi, M. A.: Metamaterial Based Microwave Band-Pass Filter
635 Uher, M.; Fialka, J. & Vagner, M.: Confirmation of Mathematical Model of Helmholtz Coils on the Real Constructions
636 Trufasu, D. – C.; Besnea, M. – A. – C.; Andrei, G. & Dima, D.: Parameters Identification of Mechanical Behaviour Law for Polyether-Ether-Ketone Composites
637 Motomancea, I. L. & Motomancea, A.: Considerations About the Structure of Calibrated Cold Drawn Steel Bars Prepared through the Ecotechnology of Sandblasting
638 Liebe, A. R. & Hieger, C.: Automated Workspace-Visualization for Serial and Parallel Robots
639 Besnea, M. – A. – C.; Trufasu, D. – C.; Andrei, G. & Deleanu, L.: Wear, Friction and Temperature Monitoring of Polyphenylene Sulphide Composites Under Dry Sliding Regime
640 Krotak, S.; Masek, B. & Urbanek, M.: Use the Hydroforming by Produced the Pad for Extreme Carving
641 Krotak, S. & Simlova, M.: The Rationalization of the Product Life Cycle with the Analyze of Each Phase
642 Tikal, F. & Duchek, M.: Fem Analyses of the Radiation in Heating Forging Furnace
643 Eliasova, I.; Jirkova, H.; Kusy, M.; Masek, B. & Svoboda, J.: Preparation of Metallic-Ceramic Compact by Transition Trough the Semi-Solid State
644 Martancik, B.; Martancikova, G.; Ulrich, K. & Barta, J.: In Defects Diagnostics by Using Ndt Methods and their Impact on Remaining Life
645 Iloiu, M.; Iloiu, S.; Csiminga, D. & Mangu, S.: Fuzzy Risk Versus Probabilistic Risk in Project Economics
646 Saharov, N.: Modern Production in Food Industry – Opened Challenge for the Future
647 Kopecek, P.: Job Shop Scheduling in Mechanical Engineering
648 Bivolaru, C. F.; Opran, C. & Murar, D. A.: Milling of Polymeric Sandwich Composites Products
649 Murar, D. A.; Opran, C. & Bivolaru, C. F.: Drilling of Biocomposite Polymeric Products
650 Suka, P.: Methodology of Teaching 3D Design
651 Mateias, C.; Nicolescu, A. F.; Petre, M. & Dorin, A.: Developing a Software Platform for Online Data Processing
652 Krajcova, K.; Pechacek, F. & Velisek, K.: Material Flow Design and Simulation of Part Production in the Free Machines Layout
653 Gheorghita, V.; Guempel, P.; Ceron Lopez, A. E. & Strittmatter, J.: Controlling the Stroke of Shape Memory Actuator Wires
654 Masek, B.; Vancura, F.; Aisman, D. & Jirkova, H.: Minithixoforming of High Chromium Tool Steel X210Cr12 with Various Initial States
655 Rutar, A. & Mestrovic, D.: Organization of E-Learning Course
656 Maibohm, C. & Bilberg, A.: Bio-Inspired Smart Sensors for a Hexapod Robot
657 Kerak, P. & Holubek, R.: Automatic Gripper Exchange in Intelligent Manufacturing Systems
658 Petrtyl, J.: Use of E-Business to Gain Competitive Advantage
659 Navratil, P. & Ivanka, J.: Recursive Identification Algorithms Library in Matlab&Simulink
660 Cavar, I. & Valencic, D.: Applicability of Analytical Tree Search Algorithms in Network Routing
661 Garais, G. E. & Enaceanu, A. S.: Determining Quality Levels for Improving Maintenance Processes
662 Beranek, L.; Volf, L. & Mikes, P.: Coordinate Metrology Education Using Virtual CMM
663 Hilaida, T. D.; Juan – Carlos, H. – M.; Vizan – Idoipe, A. & Rios, J.: Pm Information Exchange Framework for Decision Support Systems
664 Dubovska, R.; Majerik, J.; Chochlikova, H. & Baska, I.: Residual Stress Measurement by X-Ray Diffraction Method
665 Edu, T. M.; Negricea, C. I. & Anicai, O.: Marketnet – An Internet- Based Marketing Research Model for Studying Marketing Needs of Companies
666 Malega, P. & Spisak, E.: Proposal of Production Optimization in the Enterprise
667 Pisan, R. & Gazdos, F.: A Comparative Study of a Real System Identification
668 Kramna, E.: Flexible Manufacturing System Investments and Real Options
669 Feriancik, M. & Liska, O.: Autonomous Positioning Based on Machine Vision
670 Pinzon Chica, R. J.; Lascano, S. K. & Maury – Ramirez, H.: Design for Manufacturing and Assembly and CAE Tools. the Case of a Rice Husker
671 Novacescu, F.: Trends in the Field of High Performance Computing and their Influence on HPC Field
672 Chereches, C.; Toader, R.; Radulescu, C. M.; Zima, L. A. & Sabou, S.: Business Strategies Regarding the Evaluation of Leadership Styles
673 Doni, Z.; Buciumeanu, M. & Palaghian, L.: Wear Behavior of Ti6Al4V Alloy Under Dry Reciprocating Sliding
674 Ghenadi, A. S.; Bibire, L. & Topliceanu, L.: A Life-Cycle Analysis of a New Romanian Automotive Manufacturing Battery
675 Maleshkov, S.; Bachvarov, A.; Milenkov, N. & Chotrov, D.: Service Oriented Product Data Customization through Visual Markers on Mobile Devices
676 Jurjevic, M.; Barisic, B.; Katalinic, B.; Krsulja, M. & Car, Z.: Suitable Devices for Measuring Roughness on Oil Filter Housing
677 Juraga, I.; Alar, V.; Simunovic, V. & Stojanovic, I.: Influence of Deformation Induced Martensite on Brittleness of Austenitic Stainless Steel
678 Raskin, M. A.: Combinatorial Limitations of Coverage Testing for Control Systems
679 Drutu Ivan, M.: Ecological Modernisation a Basis for the Tourism Sustainable Development
680 Despot, V.; Barisic, B.; Katalinic, B.; Krsulja, M. & Car, Z.: Radioscopic Measurement on Fuel Filter Support: Inspection for Health of Material
681 Becic, D.: Comparative Analysis of Corporate Governance Systems
682 Michalec, I. & Maronek, M.: Plasma Arc Welding of Steel Sheets Treated by Nitrooxidation
683 Michalec, I.; Jancar, J. & Maronek, M.: Fatigue Properties of Weld Joints of Steel Sheets Treated by Nitrooxidation
684 Bogovic, I. – N.; Barisic, B.; Katalinic, B.; Krsulja, M. & Car, Z.: Digitizing System ATOS – Measuring Turbo Compressor Housing
685 Kozacinski, H. & Knezevic, P.: Configuration of Quality of Service Parameters in Communication Networks
686 Percoco, G.; Galantucci, L. M. & Lavecchia, F.: 3D Digitization of Curves on Human Bodies by Means of Digital Close Range Photogrammetry
687 Lupea, D.; Man, S. I. & Lazea, G.: Simultaneous Localization and Mapping for a Wheelchair Using Electromiographic Signals
688 Vanek, J. & Nestorovic, T.: Measurements to Determine a Radiation Standard of Thermal Comfort
689 Pohl, L. & Vesely, L.: Robustness Analysis of Pmsm LPV Controller
690 Teeravaraprug, J.: Determination of Inspection Point Based on Process Costing Methodology
691 Hodak, M.; Barisic, B.; Katalinic, B.; Krsulja, M. & Car, Z.: Flatness of Mechanical Interface of Housing Filter: Comparing Methods
692 Zahradnickova, L. & Vacik, E.: The Basic Characteristics of Successful Business Strategy
693 Mikhailova, E.; Mikhaylov, M. & Stazhkov, S.: Investigation of Risk Management Problems When Constructing of the QMS Processes
694 Zezulka, F.; Sembera, J.; Vesely, I. & Sajdl, O.: System for Measurement, Prediction and Energy Save
695 Hrelja, M.; Brezovnik, S.; Balic, J. & Brezocnik, M.: Advanced Electric Resistance Machining Tool
696 Clipa, R. I.; Pohoata, I. & Clipa, F.: The New Economic Geography: After Two Golden Decades
697 Ehrenmann, S. & Tekic, Z.: Cultural Diversity as a Factor of Companies' International Activities – Case of Indo-German R&D Collaboration
698 Bartunek, M.; Moravcik, O. & Schreiber, P.: Safety Distance for Vehicles through Simulation
699 Cipin, R. & Vondrus, J.: New Method of Electromagnetic Design of AC Machines
700 Tudose, M. B.; Radu, M. & Radu, D.: Firms' Financing from the Perspective of Mathematical Game Theory
701 Tudose, M. B.: Reflections on Research in Corporate Capital Management
702 Vondrus, J. & Cipin, R.: Bifurcation Analysis of Direct-Current Microdrive
703 Klima, B.; Hutak, P. & Prochazka, P.: A Control System for Mobile Forestry Cableway with Hydrostatic Drives Part 2
704 Rosca, D. & Rosca, A.: Thermovision Predictive Maintenance for Large Capacity Milling Process in Food Industry
705 Daneshmand Malayeri, A.: A New Model in Cyber Enterprise Management Based on ERP
706 Vukelic, G. & Brnic, J.: Comparison of Materials Fracture Resistance Based on J-Criterion
707 Hutak, P.; Klima, B. & Prochazka, P.: A Control System for Mobile Forestry Cableway with Hydrostatic Drives – Winding Drums Control
708 Jurik, M.: Comparison Rate Wavelet Transform for Selected Types
709 Domil, A. E.; Artene, A. E. & Costescu, I. D.: Considerations Regarding the Relation Between Fiscality and Technological Innovation in Romania
710 Prochazka, P.; Klima, B. & Hutak, P.: A Control System for Mobile Forestry Cableway with Hydrostatic Drives Part 1
711 Berger, D. & Fuerbacher, R.: Development of Measurement Technique for Cutting Edge Defects in Fiber Reinforced Plastics
712 Berger, D.: Development of a Discrete Simulation Model for a Light Rail Vehicle Assembly Line
713 Sir, M.; Bradac, Z. & Kaczmarczyk, V.: Model of Automation Device for Ontology
714 Guelsuen, B.: Selection of AS/RSs by Using Fuzzy Topsis Method
715 Guneri, A. F.; Oezguerler, S. & Parlak, M.: Meta Heuristic Approach for Early-Tardy Single Machine Scheduling Problem
716 Galea, A.; Gansca, S. G.; Radu Hanea, C. M.; Rosca, M. & Trif, I. N.: Solution to Extend a Chimney at Industrial Power Plant
717 Gansca, S. G.; Rosca, R.; Sapariuc, F.; Trif, T. N. & Trif, I. N.: Hybrid Solutions for the Autonomy of a Modern Telecommunications Site
718 Matyas, J. & Vlcek, K.: Experimental Antenna Design Based on Natural Constructions
719 Dimitriou, A. A.; Dorn, C. & Bleicher, F.: A Holistic Approach for Energy Efficient Production Facilities
720 Pikner, M. & Kubalcik, M.: Adaptive Predictive Control of Nonlinear Servo System
721 Pikner, M. & Kubalcik, M.: Predictive Control of Nonlinear Servo System with Disturbance Rejection
722 Dinuca, C. E.; Ciobanu, D. & Istrate, M.: A Method for Improving the Prediction of Next Page Request of a Web User
723 Vrincianu, M.: Methodological Framework for Knowledge Capitalization in Accounting and Financial Area
724 Mala, J.; Hasayova, M. & Bielik – Marettova, M.: Information Quality
725 Azemovic, E.; Horman, I.; Vukas, N. & Hajdarevic, S.: Uv Hardening and Internal Stresses in Water Based Lacquers
726 Silhavy, P.; Silhavy, R. & Prokopova, Z.: Unified Software Requirements Elicitation Process Overview
727 Sonk, K.: Automatic Creation of a Company Model Using Functional Requirements
728 Sevcik, D.; Adamek, M. & Jurikova, L.: A Mindreader System for Improved Security in Crowded Areas
729 Brutans, V. & Torims, T.: Study of the Durability of Materials Used in Turnout Crossings
730 Letunov, A. A.; Barladian, B.; Galaktionov, V. A.; Ershov, S. V.; Voloboy, A. & Zueva, E.: Device for Measuring Spectral – Spatial Distribution of Light Dispersed by Surfaces
731 Szakacs Simon, P. & Moraru, S. – A.: Microcontroller Based Biosignal Acquisition and Analysis System
732 Peschl, M. & Hoffmeister, M.: A Task-Driven Flexible Manufacturing System for Major Industrial Applications
733 Zborkova, J. & Dvorakova, L.: The Sustainable Development Concept in the 21st Century
734 Sapariuc, F. – A.; Uncu, I.; Dragan, A. M.; Hanea Radu, C. M.; Banea, A. & Trif, I. N.: Mechanization and Welding Control Structure Metal Seat Auto
735 Lukas, L. & Hromada, M.: Risk Analysis in Context of Critical Infrastructure Protection
736 Vukelic, B. & Pogarcic, I.: Employers' Evaluation of Online Education
737 Boumella, N.; Iqbal, S.; Boulemden, M. & Djouani, K.: Designing a Global Fuzzy Logic Forecaster for Chaotic Time Series
738 Pavlech, M.: Framework for Development of Distributed Evolutionary Algorithms Based on MapReduce
739 Bahtovski, A.: Comparison of SER (Symbol Error Rate) in SC-FDE and Ofdma Modulation Schemes
740 Prodromou, D.: Robotas – Development of a Mobile Robot for Small Goods Transport
741 Adam, A.: Transfer of Knowledge in Multinational Companies: Introduction, Concepts and Controverses
742 Souckova, R.: Future Business Strategies of Independent Brewers in Globalized World
743 Sarkans, M. & Eerme, M.: Programming Time Estimation and Production Planning Steps on Welding Robot Cells in SME-s
744 Pastuszkova, E. & Palka, P.: Performance Management in the Sphere of Public Administration
745 Luftensteiner, F. & Stopper, M.: The Impact of Highly Varying Order Sizes on a CONWIP Controlled Production Line
746 Bendekovic, J. & Vuletic, D.: Analysis of Safety Indicators of Croatian Big Shipyards
747 Jilek, T. & Zalud, L.: Evaluation of Real Accuracy of Azimuth Measurement in the External Environment Using GNSS Compass
748 Oplustil, M.: Building Bus Systems Comparation
749 Pazdera, I. & Prochazka, P.: Integrated Control and Power Electronics for BLDC Motor
750 Nistor, N.; Predescu, L. & Istudor, I. I.: Analysis of the Voluntary Disclosure of Companies' Performance Indicators
751 Makraiova, J.; Caganova, D. & Cambal, M.: A Proposal to Improve the Adaptation Control System in Automotive Sector Enterprises
752 Fekiac, J.; Klimkova, E. & Pavlech, M.: Cellular Graph Grammar Encoding of Neural Networks
753 Predescu, L.; Nistor, N. & Istudor, I. I.: Resource Consumption in Local Public Administration in Romania
754 Navratil, J.; Stanek, M.; Manas, M.; Manas, D.; Bednarik, M. & Mizera, A.: Utilization of DMLS in Injection Mold Design
755 Istudor, I. I.; Predescu, L.; Nistor, N. & Mocanu, F.: Deferred Taxes Contribution to the Increase of the Financial Information'S Realism
756 Radulovic, A.: Design of Future Single Aisle Aircraft
757 Bregni, A.; D'Avino, M. & Schiraldi, M. M.: A New Approach to Lower MRP Nervousness
758 Brazda, M.; Neckar, P. & Adamek, M.: Modular System for Microprocessor Applications
759 Muntean, E. A.; Bratu, E. & Vernic, C.: A Statistical Study Regarding Smile Attractiveness from Patient'S Perspective
760 Muntean, E. A.; Bratu, E.; Valceanu, A. S.; Szuhanek, C. A. & Vernic, C.: A Statistical Study Regarding Esthetic Line Changes Before and After Orthodontic Treatment
761 Klimkova, E. & Fekiac, J.: Vizualization of Evolutionary Algorithms by Means of Complex Networks
762 Machidon, O. & Machidon, D.: Study of the Evolution of Atmospheric Precipitation in Moldavia Region (Romania) Over the Last 65 Years
763 Surynek, T. & Prokop, R.: Robust Design for PI Controllers: An Algebraic Approach
764 Muscu, I. & Cionca, M. C.: An Expressive-Functional Analysis of the Relation Between Color and General Form Applied in Storage Furniture Design
765 Muscu, I. & Olarescu, A.: Form Developing Process for Storage Furniture Design
766 Lapkova, D.; Adamek, M. & Malanik, Z.: Use of the High-Speed Camera in Self-Defence
767 Vala, R. & Jasek, R.: Security Testing of Web Applications
768 Reznicek, M.; Cerny, J. & Pata, V.: Creep Behaviour of Thermoplastics Crosslinked by Irradiation
769 Kouril, L. & Jasek, R.: Dependence of Evolutionary-Programming the Turing Machine on Settings of Differential Evolution
770 Kouril, L. & Jasek, R.: Comparison of Algorithms for Evolutionary- Programming the Turing Machine Implemented in Wolfram Mathematica and Microsoft .NET Framework
771 Malanik, Z.: Main Influence Affecting Professional Defence Solution and Result
772 Sahno, J.; Savimaa, R.; Kangilaski, T.; Opik, R.; Maleki, M. & Machado, V. C.: Data Mart Framework for Production Route Selection
773 Savimaa, R.; Kangilaski, T. & Polyantchikov, I.: A Framework for Time-Aware Change Management in Virtual Enterprises
774 Zouzelkova, I.: Olap Solution for Supply Chain Risk Management
775 Plsek, S.: Controling and Monitoring System for the Production of Biodiesel
776 Jurjevic, M.: Model of Total Costs for Determining the Optimal Capacity of the Container Terminal in Port of Rijeka Using the Queuing Theory
777 Slovak, D.: Pulse Width Modulation Midi Application
778 Slovak, D.: Universal Serial Bus Pulse Width Modulation Interface
779 Slovak, D. & Latal, P.: Music Learning Management System
780 Slovak, D. & Latal, P.: Modules of Music Learning Management System
781 Kaczmarczyk, V.; Sir, M.; Bradac, Z. & Stohl, R.: Distillation Column Model Introduction
782 Kelemenova, Z. & Cibulka, V.: The Proposal of the Methodology for Using Collaborative Management in an Industrial Company
783 Sibgatullina, T.: Classification and Calculation of Different Types of Costs of Software Quality Testing
784 Janak, E.: Synergistic Optimization of Logistics Processes via RFID Technology
785 Adamczak, S.; Janecki, D. & Stepien, K. S.: Recent Trends in Measurements of Sphericity
786 Cambal, M. & Vaskovicova Zibrinova, E.: Generation Y in Marketing
787 Kyzek, J. & Hatiar, K.: Ergonomic Program as a Tool for Enhancing Efficiency of Human Work
788 Kyzek, J.; Hatiar, K.; Ondriga, M. & Bozek, P.: A Man and His Place in Automated and Robotic Systems
789 Labas, V.; Minarik, S.; Trnovcova, V. & Psota, J.: Optical Properties of TeO2 PbCl2 PbF2 Glasses Doped with Pr and Er
790 Neukart, F.; Moraru, S. – A. & Szakacs Simon, P.: Problem-Dependent, Genetically Evolving Data Mining Solutions
791 Maric, P. & Djalic, V.: Automatic Detection of Robots' Manipulator End-Effector Position Using Sift Algorithm
792 Drienikova, K.; Hrdinova, G.; Nano, T.; Sakal, P. & Syc, M.: Contribution of Institute of Industrial Engineering, Management and Quality to Initiative Enterprise 2020
793 Katsurin, A. & Filaretov, V. F.: Features of Experimental Research of Method of Telecontrol by Manipulator
794 Pllana, G.; Maliqi, R. & Azemi, F.: Measuring the Coefficient of Friction in the Bearings in the Adopted Four-Member Mechanism for Unsteady Motion
795 Smiraus, M. & Jasek, R.: Risks of Advanced Persistent Threats and Defense Against Them
796 Kobalicek, P. & Bliznak, M.: Optimized RGB to HSV Color Conversion Using SSE Technology
797 Koltnerova, K. & Samakova, J.: The Necessity of Personnel Planning in the Project Management in Industrial Enterprises
798 Bozikova, L.; Hrdinova, G.; Kortys, M. & Sakal, P.: The Impact of Externalization of Multinational Corporations on the Operation of Industrial SMEs
799 Strakova, N. & Hatiar, K.: Implementation of an Ergonomics Program in the Manufacturing Companies
800 Ciortan, M.: Kinematic Analysis of Jaw Movements
801 Smida, L.; Hrdinova, G.; Sakal, P. & Syc, M.: A Possibility of Social Inclusion by Responsible Entrepreneurship in Slovakia
802 Macaveiu, M. D. & Alexandru, P.: Structural-Kinematic Components of a Steering System for Vehicles with Integral Steering
803 Sekanina, A.; Prokopova, Z. & Silhavy, R.: Mobile Applications Testing
804 Kriz, V. & Zalud, L.: State Space Control System for Reconnaissance Flying Robot with Rotor Nonlinearity Suppression
805 Maliqi, R. & Pllana, G.: Determination of Composition and Nature of Crystal Thin Surface Layers Using X-Ray Radiographic Method
806 Carvalho, H.; Barroso, A. P.; Machado, V. H.; Azevedo, S. G. & Machado, V. C.: Supply Chain Resilience: a Simulation Study
807 Volf, L. & Beranek, L.: Computer Simulation of Measurement Process and Systems
808 Knezevic, G.; Fekete, K. & Nikolovski, S.: Simulation of the Residential Photovoltaic System Expansion Impact on the Voltage Profile
809 Halbac – Cotoara – Zamfir, R.: An Analysis of Drainage Head Losses Using Computer Science Tools
810 Drozdova, A.; Hodulikova, P. & Snircova, J.: Creative Accounting – the Possibilities of Impact of the View of Financial Situation of Engineering Enterprises
811 Shipovalov, E. & Pryanichnikov, V. E.: Experimental Control System for Mobile Robot with Ultrasonic Sensors
812 Bakos, L. – A.: Smart City Management and Holonic Manufacturing Concept
813 Belusky, M.; Hodulik, M. & Vidova, H.: Optimization of Material Flow in Engineering Company
814 Rogale, D.; First Rogale, S. & Bobovcan, M.: Determination of Optimum Parameters for Welding Polymeric Foils Using the High-Frequency Technique
815 Duehring, S.; Spanielka, J. & Taraba, B.: Quantified Results of Rapid Cooled C-Pattern in Agitated Quenchant
816 Badescu, A. V. & Cristea, R. N.: Dynamic Behavioural Decision Systems
817 Kaiserova, V. & Sakal, P.: Strategic Management of Engineering Companies Following Sustainability Development Aspects
818 Videnova, V.; Krajcovicova, K. & Sablik, J.: Innovation and Ten Success Factors in Engineering Industry
819 Andrasova, A.; Hajnik, B. & Zlocha, J.: Sustainable Development in Small and Medium-Sized Engineering Companies
820 Ciocoiu, C. N.; Banacu, C. S. & Tartiu, V. E.: Assessment of Eco Design Potential of Electrical and Electronic Equipments Producers
821 Takosoglu, J. E. & Laski, P. A.: Intelligent Positioning System of Electro-Pneumatic Servo-Drive
822 Zabeli, M.; Terziqi, A. K. & Bajraktari, B. V.: Optimal Time of Blowing the Oxygen in the Decarbonization of Cast Iron in Steel in Metal Janjevo
823 Skuflic, L. & Mravak, T.: Liberalization and Development in ICT Sector: The Case of Croatia
824 Popovici, A. – I.; Petrescu, F. & Radulescu, I.: Assesment of the Effects of Lubricants Degradation Affecting the Friction
825 Laski, P. A. & Takosoglu, J. E.: Design a Pneumatic Parallel Manipulator of Tripod Type
826 Stancic, I.; Supuk, T. & Zanchi, V.: Building and Testing of a Simple High Speed Kinematics Measurement System
827 Zenzerovic, P. & Car, Z.: Vehicle Beam Light Assistant System
828 Zenzerovic, P.; Macuka, D. & Kriskovic, D.: Remote Laboratory for Automation System Design
829 Pesina, Z. & Sopousek, J.: Application of the Simultaneous DSC/DTA/QMS Thermal Analyse to Alloy and Nanopowder Characterization
830 Azimi, P.: Optimization via Simulation Technique Using a Revised RCM
831 Mikacic, I. & Dulcic, Z.: Application of the Process Approach in the Shipbuilding Industry of Croatia
832 Ignat, R.: The Impact of Economic Crisis Upon Romanian Agro-Food System: Challenges and Possible Solution
833 Strbac, B.; Hadzistevic, M.; Vrba, I.; Radlovacki, V. & Hodolic, J.: Analysis of Influencing Factors on Stylus Calibration of CMM
834 Jianu, C.; Campian, C. V.; Rigou, V.; Szabolcs, S. & Iuhasz, D.: A Dynamic Analysis of Inner Bearing Bush From Blade Adjustment Mechanism of Kaplan Turbines
835 Cerna, L. & Vana, K.: New Ways in the Marketing Communication
836 Rosca, V.: Necromarketing: When Unexpected and Unwanted Impact Notoriety
837 Herman, V. & Petricevic, A.: Motivation of Workers as a Factor of Improving the Quality of Business

 

Comments are closed.

Last modified on: November 6th, 2014.