28th DAAAM International Symposium

000 Katalinic, B.: Preface
001 Subudhi, B.; Rayguru, M. M.; Filaretov, V. & Zuev, A.: Design of a Consensus Based Flocking Control of Multiple Autonomous Underwater Vehicles Using Sliding Mode Approach
002 Filaretov, V.; Zuev, A.; Zhirabok, A.; Konoplin, A.; Protcenko, A. & Subudhi, B.: Development of Fault Accommodation System for Actuators of Underwater Manipulators
003 Andreev, V.; Kim, V. & Pletenev, P.: The Principle of Full Functionality – the Basis for Rapid Reconfiguration in Heterogeneous Modular Mobile Robots
004 Buchmeister, B. & Palcic, I.: Implementation of Correlation Analysis to Work Sampling Results
005 Puljic, J.; Jakovic, B. & Strugar, I.: Analysis of Websites in Event Management
006 Shevtshenko, E.; Karaulova, T.; Igavens, M.; Strods, G.; Tandzegolskiene, I. & Tutlys, V.: Dissemination of Engineering Education at Schools and its Adjustment to Needs of Enterprises
007 Skocik, P. & Korbel, J.: Assessment of Shielding Effectiveness and Percolation Threshold of Composite Materials
008 Janacova, D.; Mokrejs, P.; Sviatskii, V.; Vasek, V.; Liska, O. & Kolomaznik, K.: Mathematical Model of Washing of Filtration Cake
009 Perutka, K. & Sarmanova, L.: New Computer Game in MATLAB for Educational Purposes
010 Perutka, K. & Hribnakova, A.: New Software Supporting Teaching of SIMULINK for Full-time Curriculum
011 Kramar, V.: Formation of Equivalent Models of Structured Multirate Systems in the Form of Signal Graph
012 Ritzberger, N.; Emenshuber, S.; Schubert, G.; Voglsinger, F.; Kubinger, W. & Fuchslocher, F.: Mobile Robot for Exploration and Manipulation Inside a Nuclear Power Plant
013 Bajric, H.; Kadric, E.; Pasic, M.; Pasic, M. & Bijelonja, I.: A Comparison of Two Parameter Same Slope Seasonality and Holt-Winters Exponential Smoothing Models
014 Mlinaric, T. J.; Rados, B. & Vajdic, M.: Proposal for the Implementation of the European Rail Traffic Management System (ERTMS) to the Railway Network in the Republic of Croatia
015 Kralik, M.; Bachraty, M.; Pokusova, M. & Durakbasa, N.: Measuring of Friction Factor of Cutting Environment
016 Kralikova, R.; Rusko, M. & Wessely, E.: Ekolabeling as Development Facilitator of the Environmentally Oriented Product Policy
017 Koblasa, F.; Kancian, P.; Props, J.; Kralikova, R. & Wessely, E.: Possibilites of Using Kinect Sensor in Ergonomy
018 Kremljak, Z.: Economy of Biogas Plants
019 Damic, V.; Cohodar, M. & Muratovic, M.: Dynamic Modelling of Mobile Robots Based on its 3D CAD Model
020 Zhirabok, A.; Filaretov, V. & Shumsky, A.: Fault Isolation in Technical Systems Based on Non-parametric Method
021 Shumsky, A.; Zhirabok, A. & Kalinina, N.: Human-Operator Behaviour Monitoring in IT-Systems
022 Radinger, T.; Stuja, K.; Wolfel, W. & Markl, E.: Functional Safety Concept for a Handling Robot Built on Optical Systems
023 Carutasu, N. L.; Adir, V.; Pascu, N.; Carutasu, G. & Florin Arion, A.: Signage and Ergonomics in Packaging Systems
024 Kadric, E.; Bajric, H. & Pasic, M.: Modeling Lead Time Demand in Continuous Review Inventory Systems
025 Carutasu, G.; Coculescu, C. & Botezatu, M.: Romanian Roadmap for E-Call Technology Adoption and Future Developments of Emergency Systems
026 Matusu, R.; Pekar, L. & Korbel, J.: Robust Stabilization of a Heating-Cooling System by Using Two Feedback Controllers: a Numerical-Graphical Analysis
027 Bulgakov, V.; Adamchuk, V.; Kuvachоv, V.; Arak, M. & Olt, J.: Study Into Movement of Wide Span Tractors (Vehicles) Used in Controlled Traffic Farming
028 Maksarov, V.; Zlotnikov, E. & Olt, J.: Determining the Load on Support Rollers the Pipe Conveyor Belt
029 Macku, L. & Novosad, D.: Influence of Online Identification Methods on the Nonlinear Process Control
030 Korbel, J.; Pekar, L. & Prokop, R.: Delay Systems with Meromorphic Functions Design
031 Pajaziti, A.; Asllani, T. & Gjelaj, A.: Design And Construction of a Modular Cost-Effective CNC Machine
032 Ziljak Grsic, J.; Tepes Golubic, L.; Ulla, L. M. & Jurecic, D.: Hidden Information in Infrared Spectrum on Safety Clothes
033 Navratil, M. & Polasek, J.: Designing An Application To Optimize The Calibration Of Output Devices In A Digital Print Environment
034 Cekic, A.; Obucina, M.; Begic-Hajdarevic, D. & Hebibovic, M.: Analysis of Mechanical Properties of Alternative Materials for Process Fused Deposit Modeling
035 Yukhimets, D.; Zuev, A. & Gubankov, A.: Method of Spatial Path Planning for Mobile Robot in Unknown Environment
036 Hadziahmetovic, H. & Dzaferovic, E.: Calculation of Air-Slide Conveyor
037 Vanova, J.; Paulova, I.; Rusko, M. & Hekelova, E.: Creating Corporate Culture in Context with Standards ISO 9001: 2015
038 Januska, M. & Faifr, A.: Optimization of the In-Process Control Process Using Six Sigma Methods and Tools
039 Jenicek, S.; Bublikova, D.; Jirkova, H. & Kana, J.: Stability of Retained Austenite in High-Strength Martensitic Steels during Cold Deformation
040 Majstorovic, V. & Rakic, K.: Internet of Things and Social Media: Tools of a Successful Information Organization
041 Crnokic, B.; Ljesic, G.; Stojkic, Z. & Bandic Glavas, M.: Analysis of Energy Consumption in the Building as the Basis for Development of the Modular Model Predictive Control System
042 Park, H. S. & Dang, X.: Development of Technology for Improving Productivity and Quality of Injection Molding
043 Kadric, D.; Delalic, N.; Midzic-Kurtagic, S.; Delalic, B. & Medar, K.: Energy Efficiency Assessment And Improvement Measures For Furniture Factory
044 Breido, I.; Kaverin, V.; Ivanov, V.; Voytkevich, S. & Levin, I.: System of Protection and Diagnostics of Structural Elements of Support of High-Voltage Power Lines
045 Vaskova, H. & Hrano, J.: Spectroscopic Measurement of Textile Fibres
046 Fulemova, J.; Kutlwaser, J.; Gombar, M. & Rehor, J.: Influence of Selected Technological Factors on the Hole Quality During Reaming
047 Hajdarevic, S.; Obucina, M. & Mesic, E.: Effect of Veneer Composition on the Stiffness and Stress of Laminated Wood
048 Mudnic, E.; Celar, S.; Seremet, Z. & Matic, F.: European Swaption by Monte Carlo Estimation on Modern Intel Architectures
049 Hodzic, D.; Hajro, I. & Tasic, P.: Regenerative Heat Treatment of Prolonged Exploited Heat Resistant Steel
050 Kharin, K.; Kuvshinov, S.; Pryanichnikov, V. E. & Anufrieva, E.: Implementation of Augmented and Virtual Reality Technologies for an Educational and Research Situation Center
051 Chval, Z. & Cechura, M.: Mechanical Forging Press for Progressive Working in Automatic Process
052 Busuladzic, I.; Horman, I. & Hajdarevic, S.: Prediction of Wear of Woodworking Tools Depending of the Chip Thickness by Boundary Element Method Simulation
053 Bicova, K. & Bebr, L.: Identification of Special Causes
054 Vopat, T.; Kuruc, M.; Simna, V.; Zaujec, R. & Peterka, J.: Cutting Edge Microgeometry and Preparation Methods
055 Kuruc, M.; Vopat, T.; Simna, V. & Necpal, M.: Influence of Ultrasonic Assistance on Delamination During Machining of Different Composite Materials
056 Melichar, M.; Kubatova, D. & Kutlwaser, J.: Influence of CMM Velocity on Scanning Precision
057 Zetkova, I.; Kucerova, L.; Zetek, M.; Cesanek, J.; Hanzl, P. & Dana, M.: Evaluation of Metal Powder for Additive Manufacturing of Margaring Steel
058 Zetek, M.; Vozar, V.; Baksa, T. & Zetkova, I.: Influence of the Milling Cutter Diameter on the Cutting Tool Life when Machining Inconel 718
059 Suleykin, A. & Panfilov, P.: The Simulation-Based Smart Management Approach for Cellular Network Operation and Planning
060 Ivanov, A. & Tekic, Z.: Extracting Patent-Related Information from Online Social Networks: Case of Facebook
061 Rauker Koch, M.; Asenbrener Katic, M. & Pavlic, M.: Fable Representation in FNOK and DNOK Formalisms Using the NOK Conceptual Framework
062 Masic, A.; Pikula, B. & Bibic, D.: Dynamic Characteristics of the Electric Vehicle
063 Masic, A.; Pikula, B. & Bibic, D.: Mobile Measurements of Particulate Matter Concentrations in Urban Area
064 Kubatova, D.; Melichar, M. & Kutlwaser, J.: Impact of Stylus Size in Roughness Measurement
065 Dana, M.; Zetkova, I.; Hanzl, P. & Hronek, O.: Accuracy of Holes Created by 3D Printing (DMLS)
066 Andreev, V. & Pletenev, P.: Organizing Intermodular Communication for Heterogeneous Modular Mobile Robot
067 Hanzl, P.; Zetkova, I. & Dana, M.: A Comparison of Lattice Structures in Metal Additive Manufacturing
068 Kroupa, T.; Dana, M. & Zetek, M.: Using of Waterjet Technology for Cutting Aluminum Alloy
069 Kroupa, T.; Dana, M. & Zetek, M.: Abrasive Waterjet Cutting
070 Baksa, T.; Hronek, O.; Farsky, J. & Zetek, M.: Influence of Cutting Conditions on the Surface Quality and Grinding Wheel Wear During Cylindrical Grinding of Inconel 718
071 Filaretov, V. F.; Konoplin, A.; Konoplin, N. & Subudhi, B.: Method for Supervisory Implementation of Manipulation Operations by Underwater Vehicles
072 Filaretov, V. F.; Konoplin, A. & Konoplin, N.: System for Cooperative Movements of ROV and its Supporting Vessel
073 Polcar, J.; Horejsi, P.; Kopecek, P. & Latif, M.: Using Unity3D as an Elevator Simulation Tool
074 Ponomarev, K.; Kudryashov, N. & Popelnukha, N.: Main Principals and Issues of Digital Twin Development for Complex Technological Processes
075 Sklariks, S. & Torims, T.: Industrially Usable Numerical Calculation-Based Method for Estimating Residual Stress due to Laser Cladding Refurbishment
076 Klobucar, R.; Strbac, B. M.; Hadzistevic, M. & Acko, B.: Metrological set-up for Calibrating 1D Line Scales with Sub-Micrometre Precision
077 Sedlacek, F. & Lasova, V.: Determining the Strength of Composite Integrated Joints Using Numerical Simulations
078 Hajicek, Z. & Marek, V.: Simulation of Virtual Machine Tool During the Machine Design
079 Polak, R.; Sedlacek, F. & Raz, K.: Determination of FDM Printer Settings with Regard to Geometrical Accuracy
080 Hnatík, J. & Kroft, L.: Specific Design of Critical Drivetrain Component
081 Kroft, L.; Hnatík, J. & Bicova, K.: The Effect of The Strategy of Finishing on Dimensional Accuracy
082 Medojevic, M.; Medojevic, M.; Cosic, I.; Lazarevic, M. & Dakic, D.: Determination and Analysis of Energy Efficiency Potential in Socks Manufacturing System
083 Kuncar, A.; Sysel, M. & Urbanek, T.: Differential Evolution as Calibration Technique for Three Axis Gyroscope
084 Urbanek, T.; Kolcavova, A. & Kuncar, A.: Inferring Productivity Factor for Use Case Point Method
085 Prochazkova, D.; Prochazka, J.; Rusko, M.; Mikulova, M. & Ilko, J.: Model for Critical Infrastructure Safety Management
086 Hajro, I.; Hodzic, D. & Tasic, P.: Mechanical Properties of Heat-Affected Zone of High-Strength Steel Welds
087 Kuzmin, A.; Popov, V. & Stazhkov, S.: Experimental Research of Rotation Transmission Device in High Ambient Hydrostatic Pressure Conditions
088 Kuzmin, A.; Popov, V. & Stazhkov, S.: Hydrodynamic Processes in Piston–Bore Interface of Axial Piston Swash Plate Machine
089 Marek, V. & Hajicek, Z.: Thermal Simulations Based on Macro-Models
090 Andreev, V. & Kim, V.: The Application of Artificial Vector Fields for Motion Control of a Heterogeneous Modular Mobile Robot
091 Stekleins, A.; Gerins, E. & Kromanis, A.: Vacuum Gauge Verification Methodology for Vacuum Coating Deposition Processes
092 Stekleins, A.; Gerins, E. & Kromanis, A.: Prediction of SiO2 Nano Coating Properties Using Fuzzy Logic
093 Cvetkovic, N.; Moraca, S.; Jovanovic, M.; Medojevic, M. & Lalic, B.: Enhancing the Agility and Performances of a Project with Lean Manufacturing Practices
094 Skovajsa, M. & Sedlacek, F.: Analytic Determination and Numerical Simulation of Torsional Stiffness of a Racing Car Frame
095 Filaretov, V. F.; Konoplin, A.; Konoplin, N. & Gorbachev, G.: Technology for Automatic Soil Sampling by Manipulators Mounted on Underwater Vehicles
096 Zatopek, J. & Urednicek, Z.: Dynamic Behaviour Comparison of Three Different Mathematical Model Complexities
097 Kropotin, A.; Bidulya V., Y. & Ivashko G., A.: Evaluation of the Ontological Method of Integrable Data Inconsistency Identification
098 Predovic, A.: Yarn Unwinding from Packages
099 Jemelka, M. & Chramcov, B.: Strategic Management and Multiplier Effect
100 Martirosov, S. & Kopecek, P.: Virtual Reality and its Influence on Training and Education – Literature Review
101 Martirosov, S. & Kopecek, P.: Cyber Sickness in Virtual Reality – Literature Review
102 Deac, C. N.; Deac, C. N.; Popa, C. L.; Ghinea, M. & Cotet, C. E.: Using Augmented Reality in Smart Manufacturing
103 Deac, C. N.; Deac, C. N.; Popa, C. L.; Ghinea, M. & Cotet, C. E.: Machine Vision in Manufacturing Processes and the Digital Twin of Manufacturing Architectures
104 Savu, I.; Popa, C. L. & Cotet, C. E.: Mitigating Friction in Multicultural Virtual Organizations / Teams
105 Costache (Stochitoiu), A. G.; Popa, C. L.; Dobrescu, T. G. & Cotet, C. E.: The Gap Between the Knowledge of Virtual Enterprise Actor and Knowledge Demand of Industry 4.0
106 Ojstersek, R. & Buchmeister, B.: Use of Simulation Software Environments for the Purpose of Production Optimization
107 Kharuzin, S.; Ivanov, A. & Shmakov, O.: Autonomous Control System for a Vehicle with Actively Articulated Frame
108 Reiter, M.; Krall, S. & Bleicher, F.: Mechanical Functionalisation of Cutting Inserts by Machine Hammer Peening
109 Mitin, F. & Krivushov, A.: Control Deployment of Mobile Units of Large-Sized Spacecraft
110 Vasiliev, A.; Dalyaev, I. & Slyuta, E.: Design Concept Lunar Rover for the Moon Geological Exploration
111 Vekic, A.; Borocki, J.; Stankovski, S. & Ostojic, G.: Development of Innovation in Field of Precision Agriculture
112 Nikolic, B.; Ignjatic, J.; Suzic, N.; Stevanov, B. & Rikalovic, A.: Predictive Manufacturing Systems in Industry 4.0: Trends, Benefits and Challenges
113 Zaujec, R.; Vopat, T.; Simna, V. & Pokorny, P.: The Influence of CAM Strategies on the Tool Wear and Surface Roughness
114 Milde, J.; Hrusecky, R.; Zaujec, R.; Morovic, L. & Gorog, A.: Research of ABS and PLA Materials in the Process of Fused Deposition Modeling Method
115 Munteanu, C. E.; Cismilianu, A. -.; Chira, A. & Baran, D.: Structural Optimization of Space Components Adapted for 3D Printing
116 Nikiforov, V. & Pavlov, V.: Methods of Task Clinches Prevention in Software Applications for Real-Time Systems
117 Strapek, M.; Horejsi, P. & Polcar, J.: Comparison of Methods for Modelling Production Floor Layout
118 Broniszewski, M.; Dabros, J.; Iwaniec, M.; Mateusz, P. & Wesol, J.: Gait Phase Recognition for Exoskeleton Control Using Adaptive Neuro Fuzzy Inference System
119 Tasic, P.; Hajro, I. & Hodzic, D.: Technological And Economical Aspects Of Arc Welding Of AL 5754
120 Kulichenko, A. & Smirnova, E.: Possible Application of Heterogeneous Robot Group to Search and Localize Ionizing Radiation Sources
121 Valea, P. & Strajescu, E. R.: Thermal Regime Aspects when Grinding Rubber Rolls for Paper Industry
122 Tokic, S.; Sumpor, D.; Duranovic, S. & Musabasic, N.: Analysis of Students' and Tram Drivers' Body Ratios in Order to Simplify the Control Panel Design
123 Huynh, H. N.; Verlinden, O. & Riviere-Lorphevre, E.: Robotic Machining Simulation using a Simplified Multibody Model
124 Draskovic, N.; Markovic, M. & Hruskar, D.: Challenges of the Challengers: An Insight into the Internationalization Pathway of Croatian Digital Agencies
125 Kobzev, A.; Novikova, N. & Lekareva, A.: Tracking System for Moving Object with Forecasting
126 Atiya, H. & Alkindi, L.: An Optimization of Product Design and Manufacturing Based on Sustainability
127 Kalendova, A.; Brazdilova Sabadasova, L.; Merinska, D. & Mrkvickova, S.: Changes of PVC Nanocomposite Properties Connected with Clay Content
128 Ermolaev, A.: Methods Of Evaluating Noise Pollution In The Megalopolis
129 Farsky, J.; Zetek, M.; Baksa, T. & Adamek, P.: Influence of Grinding Conditions on Surface Quality and Accuracy when a Tool Grinder is Used
130 Bricin, D.; Prucha, V. & Kriz, A.: Abraded Surface Properties of Sintered Carbide Specimens Before and After Deposition of a Thin Layer Using PVD
131 Smajdorova, T. & Noskievicova, D.: Parametric Versus Nonparametric Statistical Process Control
132 Shmakov, O.; Korolev, D.; Popov, D.; Kitaev, N. & Korotkov, A.: Modular Mobile Robotic Kit for Prototyping and Debugging of Control Algorithms
133 Nozar, M.; Zetkova, I.; Hanzl, P. & Dana, M.: A Customer’s View on Key Aspects of Metal Additive Manufacturing
134 Klos, S.; Fedoryshyn, R.; Savytskyi, V.; Pistun, Y. & Matiko, F.: Classification of Automatic Controllers Diagrams
135 Ficek, M. & Vicar, D.: Simulation and Modelling System for the Purposes of Crisis Management
136 Papa, M.; Kaselautzke, D.; Radinger, T. & Stuja, K.: Development of a Safety Industry 4.0 Production Environment
137 Beltran Prieto, J. C.; Beltran Prieto, L. A. & Long Huynuh Bach Son, N.: Mathematical Modeling of Thermal Management at Different Atmospheric Pressure Conditions
138 Kuts, V.; Sarkans, M.; Otto, T. & Tahemaa, T.: Collaborative Work Between Human And Industrial Robot In Manufacturing By Advanced Safety Monitoring System
139 Solovyev, M.; Vorotnikov, A.; Klimov, D.; Kovalskii, V. & Poduraev, Y. V.: Control System of the Articulated Arm Braking Mechatronic Machine (AABMM)
140 Kosterev, D.; Vorotnikov, A.; Nedelcev, S.; Romash, E. & Poduraev, Y. V.: Development of 2-DOF Adaptive Mechatronic Device with corrective adjustment of laser tracker reflector for Industrial Robot Calibration
141 Musalek, M.: A Wearable Fall Detector for Elderly People
142 Svingerova, M. & Melichar, M.: Evaluation of Process Risks in Industry 4.0 Environment
143 Hronek, O.; Zetek, M. & Baksa, T.: The Immersion Depth Influences on Cutting Edge Radius During Drag Finishing
144 Hronek, O. & Zetek, M.: The Influences of Cutting Edge Radius on Surface Roughness when Milling Nickel Alloy
145 Teich, T.; Bodach, M.; Hoffman, M.; Neumann, T.; Werler, P. & Hartel, T.: Demographic Energy-balanced Framework for Sustainable Urban Environments
146 Madhwal, Y. & Panfilov, P.: Blockchain And Supply Chain Management: Aircrafts’ Parts’ Business Case
147 Bele, M. & Hlavac, J.: Evaluation of the Energy Intensity of Forming Machines Compared to Approaches in Other Industries
148 Baicu, A. V.: Methods of Assessment and Training of a Company Towards the Enterprise 4.0
149 Muhamedagic, K.; Begic-Hajdarevic, D.; Cekic, A. & Mehmedovic, M.: Multi-Response Optimization of Plasma Cutting Parameters using Grey Relational Analysis
150 Pasic, M.; Begic-Hajdarevic, D. & Bijelonja, I.: Estimation of the Laser Cut Perpendicularity Using Linear Regression Analysis
151 Vatres, A.; Bijelonja, I. & Pasic, M.: Performance Indicators of Production Processes
152 Adamczak, S.; Stepien, K. S. & Zmarzly, P.: An Analysis of Strategies of Measurement of 3D Rotary Elements
153 Adamczak, S.; Janecki, D.; Stepien, K. S. & Wrzochal, M.: An analysis Of Contemporary Methods For Measurement Of Form Errors Of Spherical Machine Parts
154 Ipatov, O. & Sergeev, S.: Postnonclassical Paradigm of Ergonomic Design of Complex Systems
155 Peshko, M. & Ryabchevskii, V.: Digital-analog Input / Output Device with the Matlab/Simulink Environment in Real Time Mode
156 Vratny, O.; Herman, A. & Kubelkova, I.: The Application Of Thermographic Diagnostic In Investment Casting Process
157 Kubelkova, I.; Herman, A. & Vratny, O.: Evaluation of Critical Places on Wax Patterns of Blades
158 Zharova, A.; Elin, V. & Panfilov, P.: Personal Data in Cloud. Russia Experience
159 Simon, M.; Babor, J.; Bochinsky, M. & Kabele, P.: Methodology of Design and Validation of the Shop floor Millrun method
160 Malik, A. A. & Bilberg, A.: Framework to Implement Collaborative Robots In Manual Assembly: A Lean Automation Approach
161 Grube Hansen, D.; Malik, A. A. & Bilberg, A.: Generic Challenges and Automation Solutions in Manufacturing SMEs
162 Achsan, H. T.; Suhartanto, H. S. & Wibowo, W. C.: Ontology Enrichment for Multi-Domain Knowledge and Expertise Representation
163 Adamek, M.; Neumann, P.; Pospisilik, M.; Spanko, A. & Vasek, V.: Object Recognition in Images
164 Beltran Prieto, L. A. & Kominkova Oplatkova, Z.: Emotion Recognition in Video with OpenCV and Cognitive Services API: A Comparison
165 Haskovic, D.; Katalinic, B.; Zec, I.; Kukushkin, I. & Zavrazhina, A.: Intelligent Adviser Module: Proposals and Adaptive Learning Capabilities
166 Ksenzenko, A.; Prysev, E.; Pryanichnikov, V. E. & Chernyshev, V.: Design the Contactless Charger and Contactless Data Transfer between Underwater Robot- Satellits and Underwater 6-Legged Vehicle
167 Pryanichnikov, V. E.; Aryskin, A. A.; Eprikov, S.; Kirsanov, K.; Khelemendik, R.; Ksenzenko, A. Evgeny A.; Prysev & Aleksander S. Travushkin: Technology of Multi-Agent Control for Industrial Automation with Logical Processing of Contradictions
168 Ovcharenko, S. & Minakov, V.: Application of the Artificial Neural Networks for Diesel Diagnostics
169 Rusko, M.; Paulova, I.; Vanova, J. & Kralikova, R.: Connectivity of Quality Management Systems and Environmental Management Systems
170 Paulova, I.; Vanova, J.; Rusko, M.; Hekelova, E. & Kralikova, R.: Knowledge Managements for Improvement the Competitiveness of Organization
171 Nosal, J.; Brezikova, K. & Simkulet, V.: Verification of Combined Cutting tool with a Linear Cutting Edge tool
172 Davydov, D.; Eprikov, S.; Kirsanov, K. & Pryanichnikov, V. E.: Service Robots Integrating Software 4nd Remote Reprogramming

Comments are closed.

Last modified on: December 7th, 2017.